This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub Running
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
Cub Running
Today I got the Cub started for the first time since I took it apart. I was very excited that I had it running within 5 minutes after the first attempt. I had two plug wires crossed and I found the problem within a few minutes. Turned it over and it took off. I do not have the tank on as I am waiting for paint. I used a tank off of a lawn tractor for the exercise.
I am not sure how it will operate under load but it purrs at idle. I may be looking for ideas on carburetor adjustments as it seem to be a little slugish when attempting to increase RPM quickly.
I have great oil pressure
As I have had the engine down and rebuilt the carburetor I am very excited to have it running - Sounds GREAT!!!
Are there any carberator adjustments other than idle jet and linkedge?
I hope to have the tank painted soon and be taking a ride on the "Red Devil"
Thanks for all your help in the process of reworking the CUB
Bob
-
- 10+ Years
- Posts: 2917
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
-
- Team Cub Mentor
- Posts: 4911
- Joined: Tue Jun 07, 2005 2:30 pm
- Zip Code: 46055
- Tractors Owned: -
1950 Demo,1956 w/ FH, 1959 w 59" mower,
Cub L-54 Blade,152 Plow
189 plow, LF 194 Plow, Woods 42" Mower,
Choremaster Garden tractors & Implements
Antique Gas engines - Circle of Safety: Y
- Location: IN, McCordsville
-
- Team Cub Mentor
- Posts: 4128
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 13830
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
-
- 10+ Years
-
- 10+ Years
- Posts: 1055
- Joined: Thu Feb 06, 2003 9:21 am
- Zip Code: 93510
- Location: Acton Ca.
-
- 10+ Years
- Posts: 4949
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
-
- 10+ Years
Hi Brent
I will not be going to the show and I cannot get the Cub to run. On Sunday it started and ran off and on all day. On Monday it would not run and has not run since. I have been working three whole days tring to get it to run. As you can see on this forum I have had a lot of help but no lick getting it to run.
I have been focused on Caruration but I need to look elsewhere. If you have any ides I am all ears.
Have a good time at the show
Bob
I will not be going to the show and I cannot get the Cub to run. On Sunday it started and ran off and on all day. On Monday it would not run and has not run since. I have been working three whole days tring to get it to run. As you can see on this forum I have had a lot of help but no lick getting it to run.
I have been focused on Caruration but I need to look elsewhere. If you have any ides I am all ears.
Have a good time at the show
Bob
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7
- 276
-
by Clemsonfor
Sun Oct 10, 2021 7:57 pm
-
- 5
- 138
-
by Jim Becker
Mon Mar 18, 2024 2:17 pm
-
- 7
- 295
-
by Glen
Wed Feb 28, 2024 4:30 pm
-
- 8
- 338
-
by smallfarm
Mon Jul 17, 2023 6:35 am
-
- 19
- 780
-
by Eugene
Mon Oct 17, 2022 9:33 am
Who is online
Users browsing this forum: dgrapes59, tucker86 and 3 guests