Looked at the 100 today planning on replacing the thermostat. Well, to my surprise, I see no place for it. Where does it go? What I thought was a thermostat housing is nothing more than an upper water neck. The engine is correct and the serial number for it falls into the correct year for my tractor. The service info I have says nothing about a thermostat
Hard for me to believe it ran without one. The engine runs cool, I mean real cool. Could it be it has an older water neck for an "A"? I know they used radiator shudders for temp control. Any help would be appreciated. Thanks.
One more question, where does the touch control temp sensor attach? I was looking the TC hyd unit over and cannot find any port where it might screw in. Can't believe I'm missing something that seems this easy
Brian
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall 100 thermostat, another question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 59
- Joined: Fri Dec 22, 2006 6:20 pm
- Location: St Clair Shores, MI
-
- Team Cub
- Posts: 17309
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
The thermostat basicly drops into the hose end opening of the water outlet. There should be a retaining ring that goes in on top of it. If you have the correct outlet, it will have a hole in the right side for a water temperature sensor.
The Touch-Control temperature senser screws into the end of the strainer. If the tractor was not originally equipped with that gage, the strainer probably does not have the provision for screwing the sensor in.
The Touch-Control temperature senser screws into the end of the strainer. If the tractor was not originally equipped with that gage, the strainer probably does not have the provision for screwing the sensor in.
-
- 10+ Years
- Posts: 59
- Joined: Fri Dec 22, 2006 6:20 pm
- Location: St Clair Shores, MI
Jim, thank you. I'll remove the hose and have a look. Yes there is a hole for the temp sensor. I hooked up this option yesterday.
And no, the TC temp sensor wasn't originally part of this tractor. Guess I need to look for the proper strainer.
And no, the TC temp sensor wasn't originally part of this tractor. Guess I need to look for the proper strainer.
Last edited by Farmall560 on Sun Mar 11, 2007 3:26 pm, edited 1 time in total.
-
- 10+ Years
- Posts: 59
- Joined: Fri Dec 22, 2006 6:20 pm
- Location: St Clair Shores, MI
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Woods L59 question
by ShawnAgne » Sun Sep 26, 2021 5:05 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 4
- 382
-
by Gary Dotson
Sun Mar 27, 2022 7:37 am
-
-
-
Battery Box question for 100
by ShawnAgne » Fri Nov 05, 2021 4:43 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 7
- 332
-
by ShawnAgne
Sat Nov 06, 2021 7:51 pm
-
-
-
“A” carb question
by Lt.Mike » Fri Nov 12, 2021 10:26 am » in Farmall A, Super A, AV, 100, 130 & 140 - 11
- 519
-
by JoeB
Mon Nov 15, 2021 12:41 pm
-
-
- 5
- 354
-
by liquid plumber
Tue Aug 24, 2021 8:41 pm
-
-
Hyd pump question on my 54 100
by Goinbroke2 » Fri Jun 04, 2021 8:46 am » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 317
-
by Goinbroke2
Sun Jun 06, 2021 2:29 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 1 guest