This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Piston Wrist Pins

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Sheila
10+ Years
10+ Years
Posts: 1
Joined: Sat Jan 17, 2004 8:54 pm
Location: Palm Desert, CA

Piston Wrist Pins

Postby Sheila » Sat Jan 17, 2004 9:08 pm

I need (4) piston wrist pins for a 1948 60 cubic inch Farmall CUB. I can't seem to buy any except in a complete engine rebuilding kit, which I don't need. Does anyone know where they can be bought??

I need help guys!! Thanks.
Sheila :cry:
Top
User avatar
Bigdog
Team Cub Mentor
Team Cub Mentor
Posts: 24144
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Postby Bigdog » Sat Jan 17, 2004 9:10 pm

Try Jamie at J.P. Tractor Salvage - http://www.jptractorsalvage.com or Tom at T.M. Tractor - http://www.tmtractor.com One of them should be able to fix you up.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com
Top
User avatar
johnbron
Cub Pro
Cub Pro
Posts: 2809
Joined: Sun Feb 02, 2003 2:31 am
Zip Code: 00000
Location: Puyallup, WA.

Postby johnbron » Sat Jan 17, 2004 9:50 pm

Do you need the wrist-pins for the reason they are bad/lost or?. You can buy new pin bushings for $3.50 each.
Then came Bronson
Top
Cub-Bud
Team Cub Guide
Team Cub Guide
Posts: 3544
Joined: Sun Feb 02, 2003 6:30 pm
Zip Code: 38658
eBay ID: Cub-Bud
Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
Circle of Safety: Y
Location: MS, Pope

Postby Cub-Bud » Sat Jan 17, 2004 10:36 pm

Piston pins are available from Case/IH. The part # is 251241R2 and they cost about $10.00 each. The bushings in the connecting rods should be replaced if new pins are used. They will need to be pressed in and then reamed. Have a machine shop do this if you are not able. The bushings are also available from Case/IH. The part # is 251247R1 and they cost about $5.00 each.
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"

Greg Norman
Top
  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 3 guests