This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New Guy here!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 15
- Joined: Mon Jan 19, 2004 1:02 pm
- Location: New Alexandria, Pa, USA
New Guy here!
We have a late 40's early 50's Farmall Cub and we have thouroughly enjoyed using to to mow for the last 10 years. We aquired a garden plow a while back and we only ever used it once. We are now looking to get rid of it. It is hydraulic lift and works good has a sod cutter and single bottom plow. Not sure off hand of brand, could find that out. Also could get pictures if anyone is interested. Would like to get $250 for it. We are located in Western Pa. Let me know and i definately like thise site lots of useful info for our cub.
-
- 10+ Years
- Posts: 15
- Joined: Mon Jan 19, 2004 1:02 pm
- Location: New Alexandria, Pa, USA
-
- 10+ Years
- Posts: 568
- Joined: Wed Feb 05, 2003 11:15 pm
- Location: Brooklyn, Swissconsin
71 Nova,
Try posting an ad in the ad section of this forum.
Good luck trying to get $250. Most Cub plows bring half of that.
Mike
Try posting an ad in the ad section of this forum.
Good luck trying to get $250. Most Cub plows bring half of that.
Mike
30 + tractors including 2 French Super Cubs, French Cubs, 1963 Industrial Cub, 1955 Cub Highcrop etc...German and French built IH tractors and some bigger IH tractors. Of course I have about 20 IH trucks and an IH refridge in the Shop.
-
- 10+ Years
- Posts: 15
- Joined: Mon Jan 19, 2004 1:02 pm
- Location: New Alexandria, Pa, USA
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
71 Nova:
I would not say ripped off! The price of implements varies according to where you are, what is common and what is not, the condition of the item, and what it is worth to you.
If you think something is worth $175.00 and the guy wants $250.00 - dicker with him, can't hurt and if you can't get to a reasonable meeting of the pocket book, then you can decide if you want to pay his price or look elsewhere.
It is all location, supply and demand.
Here I can get a Cub-193 single bottom moldboard plow for anywhere from $75.00 to $250.00 depending on condition. That is Canadian and on the east coast. Probably in Ontario, same plow would go for $100.00 tops and in Alberta - maybe $50.00.....
I would not say ripped off! The price of implements varies according to where you are, what is common and what is not, the condition of the item, and what it is worth to you.
If you think something is worth $175.00 and the guy wants $250.00 - dicker with him, can't hurt and if you can't get to a reasonable meeting of the pocket book, then you can decide if you want to pay his price or look elsewhere.
It is all location, supply and demand.
Here I can get a Cub-193 single bottom moldboard plow for anywhere from $75.00 to $250.00 depending on condition. That is Canadian and on the east coast. Probably in Ontario, same plow would go for $100.00 tops and in Alberta - maybe $50.00.....
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 22
- Joined: Tue Dec 02, 2003 12:31 pm
- Location: Woodbury, PA
'71 Nova, my dad has one. Anyway I am in South Central Pa and would be interested if'n the price was a bit more reasonable. I have been watching prices and you might get that in the eastern part of the state or New Jersey, but I wouldn't pay more than 75.00 and that seems to be the going rate this side of Lancaster. Good luck.
Alan
Alan
Working on tractors is a true test of one's ability to balance patience and temper.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
WEAV27, you can buy a plow for $75-$100 in a lot of places, but don't forget you need the depth control leaver also. That will usually run another $75 or so. They originally came with the plow, but frequently get seperated over the years.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 22
- Joined: Tue Dec 02, 2003 12:31 pm
- Location: Woodbury, PA
Thanks, I already have a depth control lever with the linkage to the front drawbar. Between my father and I we have a fairly good assortment of extras that we can use. Always looking for another plow or any implements for that matter. We have been trying to think of the perfect implement for my dad's demonstrator that would look sharp at some shows.
I have a few ideas in mind but would like to hear some opinions as to what other people think is the best "Look" to describe a Cub. I know that Since the Cub is capable of wearing so many hats that it is hard to pick just one to show. We both have snow/grader blades, front cultivators, harrows, and single bottom plows.
I have a few ideas in mind but would like to hear some opinions as to what other people think is the best "Look" to describe a Cub. I know that Since the Cub is capable of wearing so many hats that it is hard to pick just one to show. We both have snow/grader blades, front cultivators, harrows, and single bottom plows.
Working on tractors is a true test of one's ability to balance patience and temper.
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
We have been trying to think of the perfect implement for my dad's demonstrator that would look sharp at some shows.
This one isn't a demonstrator, but I thought it was impressive.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
- Posts: 22
- Joined: Tue Dec 02, 2003 12:31 pm
- Location: Woodbury, PA
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- 10+ Years
- Posts: 22
- Joined: Tue Dec 02, 2003 12:31 pm
- Location: Woodbury, PA
I like the idea, that would definately catch an eye or two. George's picture has a lot to say for a cub and maybe I'll have to tell dad to do something like that and for parades he can put it on one of the long trailers and pull it with the Super M that he is to pick up tonight.
Working on tractors is a true test of one's ability to balance patience and temper.
Who is online
Users browsing this forum: No registered users and 3 guests