This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Final Drives
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 238
- Joined: Sat Mar 29, 2003 9:26 am
- Zip Code: 70453
- Tractors Owned: 1974 IH Cub
1975 IH Cub
MF 135
TO-20
Ford 3000
12 D Harrow Plow
151 Disc Plow - Circle of Safety: Y
- Location: LA, Pine Grove
Final Drives
I have some striped out bolt holes on my final drives, do these have to be removed to be repaired. What is the best thread repair for theses holes I believe they are 5/8 by 11 tpi. thanks
-
- 10+ Years
-
- Cub Pro
- Posts: 3094
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: 71770
- Location: AR, Waldo
Final Drive
Charles: I used a heli-coil in doing the same repair on a final drive. I did this a couple of years ago and have had no problems up to this time. It should work for you. Dan
-
- 10+ Years
Charles- On high end stuff like aircraft heli-coils are installed on parts when they are new. It makes the threads more durable and strong then they would otherwise be in the base material. My own experience is they not only provide a good repair butt the repair may be better than it was originally, if done correctly.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
80w90 GL-4 Gear Oil for Transmisssion/Final Drives
by darkmuncan81 » Mon Dec 19, 2022 7:13 pm » in Farmall Cub - 18
- 943
-
by Jim Becker
Sat Dec 24, 2022 12:24 pm
-
-
- 5
- 437
-
by KETCHAM
Mon Nov 27, 2023 8:52 pm
-
- 6
- 364
-
by Clemsonfor
Sun Sep 12, 2021 6:59 pm
-
- 1
- 212
-
by Jim Becker
Mon Feb 21, 2022 12:40 am
-
- 3
- 162
-
by Jim Becker
Mon Jul 24, 2023 2:14 pm
Who is online
Users browsing this forum: Majestic-12 [Bot] and 8 guests