Well, hello there folks!! Brian Piersol alive and well here in southcentral PA just checking in. Only one plowable snowfall for miss cubbie so far this year. Oh well- I ordered a small can of Black Velvet- A POR product for
manifolds- heat resistive jet black up to 1200 degrees. Has anyone used this and have they had good luck with it?? I was told to apply it to a bead blasted super clean bare metal cast iron surface. Also, just what temperature do you think the manifold does reach??? Next is to do the muffler after I'm happy with the manifold- I'll check in later as to how successful this turns out- I'm too fussy- I know!!!!! I just love my CUB!!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Intake/Exhaust manifold
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 39
- Joined: Wed Feb 19, 2003 9:32 pm
- Location: Lancaster COWnty, PA
-
- 10+ Years
- Posts: 10
- Joined: Thu Jan 29, 2004 5:02 pm
- Location: Central Michigan
I have used POR products over the last 3 years.I have always sand blasted to bare metal before applying POR. Did a set of exaust headers for a chevy 350 ci. high preformance .I used the silver finish,2 1/2 years old and still silver. The only rust to come back was a couple of small spots that did not get good coverage.Have always used in 70 plus temp Works great just do not get cheep and try to use thin coat. If you get it on your skin it will NOT CLEAN OFF,soaks in and must be worn off. Good Luck Russ
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 160
-
by tmays
Fri Apr 12, 2024 11:33 am
-
- 4
- 215
-
by Pap
Sat Jul 24, 2021 10:55 am
-
-
'49 Cub dripping gas at carb air intake boot Attachment(s)
by bullmack » Wed Feb 09, 2022 3:47 pm » in Farmall Cub - 19
- 802
-
by bullmack
Fri Feb 25, 2022 5:36 pm
-
-
- 6
- 270
-
by Gary Dotson
Thu Sep 08, 2022 7:33 am
-
- 13
- 343
-
by Don McCombs
Tue Nov 22, 2022 11:41 am
Who is online
Users browsing this forum: tnestell and 2 guests