This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
1952 Farmall Super A temperature gage
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 94
- Joined: Fri Jul 21, 2006 10:22 pm
- Location: Luthersburg, PA
1952 Farmall Super A temperature gage
Just about to start putting my 1952 Farmall Super A back together after a restoration project and I cannot find the hole to screw in the temperature sensor! We have looked everywhere! where is it supposed to be located? This is really frustrating! Help! Ken
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- 10+ Years
- Posts: 59
- Joined: Fri Dec 22, 2006 6:20 pm
- Location: St Clair Shores, MI
Here are a few pics of my temp gauge installed. The last three bottom pics are the temp gauge.
http://www.1970gtx.net/farmall-100.html
http://www.1970gtx.net/farmall-100.html
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- 10+ Years
- Posts: 59
- Joined: Fri Dec 22, 2006 6:20 pm
- Location: St Clair Shores, MI
-
- 10+ Years
- Posts: 94
- Joined: Fri Jul 21, 2006 10:22 pm
- Location: Luthersburg, PA
1952 Farmall Super A Temperature gage placement
Thanks for your replies! But, I am now very confused! The pictures show the water temperature sensor placement on the fan support housing. Another said the correct sensor placement is on the top side of the lower radiator elbo! My Super A had a broken water temp. gage on it by the steering wheel but I can't locate any hole to put the sensor in to sample the water temp! Any ideas? Ken
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Ken - the photos show the installation on a Farmall 100. As Jim mentioned, the sender for an A is in a different location - as mentioned - the top side of the lower radiator elbow.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 94
- Joined: Fri Jul 21, 2006 10:22 pm
- Location: Luthersburg, PA
Farmall Super A water temperature sensor placement
Thanks BigDog! I will check out the lower radiator elbo. I never have trouble putting holes in things! Thanks to all! Ken
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- 10+ Years
- Posts: 94
- Joined: Fri Jul 21, 2006 10:22 pm
- Location: Luthersburg, PA
1953 Farmall Super A temperature gage sensor placement
Hi Jim Becker! I think you hit the nail on the head! My temp gage is not for water but for the touch control hyd. Do you have a picture of where the screen cover on the left side of the T-C block is? I have no idea. Does anyone? Thanks for your help! Ken
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
I don't have a picture, but Rudi's Manual Server should. The server seems to be down right now so I can't find the exact page and post the link. When it is up, go there http://www.cleancomputes.com/Cub/index.html and follow the maintenance manual links until you get to the Preventive Maintenance Manual for the Cub, 140, 240 and 340. Go to page 44. Illistration 44A has an arrow labeled "C" pointing right at it.
-
- 10+ Years
- Posts: 94
- Joined: Fri Jul 21, 2006 10:22 pm
- Location: Luthersburg, PA
Temp sensor placement on a Farmall Super A
I have looked everywhere and still can't find a place to plug in any touch control temp. sensor. I know my tractor had one, I took the old one off, but it didn't have the wire connected. Anyone with any experience with this problem? I am stumped! Ken
-
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
Look at # 34. This is a screen filter for the hydraulic fluid. It screws into the center of it. If the gauge was disconnected, there is either a plug screwed iinto the hole OR the screen has been replaced with one without the hole for the gauge. Both types are available from Case/IH.
The four most expensive words in tractor restoration: "We might as well..."
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Need to I.D Super A
by browning1 » Sun Nov 05, 2023 8:19 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 926
-
by browning1
Fri Jan 26, 2024 3:36 pm
-
-
- 5
- 200
-
by Ang
Thu Jan 19, 2023 3:19 pm
-
-
First Super A Attachment(s)
by CDKL » Tue May 31, 2022 10:38 am » in Farmall A, Super A, AV, 100, 130 & 140 - 24
- 815
-
by Ole Timey Farmin
Sat Jun 18, 2022 3:53 pm
-
-
-
New Super A owner Attachment(s)
by DetroitDick » Sat Jun 25, 2022 8:39 am » in Farmall A, Super A, AV, 100, 130 & 140 - 16
- 506
-
by wjmj
Sun Sep 25, 2022 1:48 pm
-
-
- 7
- 989
-
by Ole Timey Farmin
Sat Jun 18, 2022 2:59 pm
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 4 guests