This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall H question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
Farmall H question
On an H just above the carb on the intake manifold is a tube ( about 3/4 in diameter) or iron passage that goes towards the frount of the tractor, I am clueless what is it?
-
- 10+ Years
- Posts: 756
- Joined: Mon Jun 28, 2004 3:34 pm
- Location: Central NY
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
It's the governor linkage.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
Bigdog wrote:It's the governor linkage.
H and M use the same setup.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
- Posts: 756
- Joined: Mon Jun 28, 2004 3:34 pm
- Location: Central NY
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
-
- 10+ Years
-
- 10+ Years
- Posts: 756
- Joined: Mon Jun 28, 2004 3:34 pm
- Location: Central NY
HI Jackman,
On a farmall H and M you have the GOV on the RH side of the front of the motor as looking from the front. There will be a cover that has about 6 or 8 small bolts on the side to get at the spring then there is a spot on the top where an aluminum tube come out of the gov linkage its about 8 to 10" long and the other end there are 2 screws that hold it to the top side of the carb. there also is a little tab there that a lot of people when they take carbs off do not get realinded and the tractor either speeds out of control or idles without moving up and RPM's. If this is not what you are looking at then you will have to ask someone that can see or get a pick somehow,
JON
On a farmall H and M you have the GOV on the RH side of the front of the motor as looking from the front. There will be a cover that has about 6 or 8 small bolts on the side to get at the spring then there is a spot on the top where an aluminum tube come out of the gov linkage its about 8 to 10" long and the other end there are 2 screws that hold it to the top side of the carb. there also is a little tab there that a lot of people when they take carbs off do not get realinded and the tractor either speeds out of control or idles without moving up and RPM's. If this is not what you are looking at then you will have to ask someone that can see or get a pick somehow,
JON
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Question for the pro's
by BillBolt » Wed Jun 16, 2021 11:44 am » in Farmall H, HV, Super H, 300 & 350 - 2
- 1268
-
by Rodney51Cub
Wed Jun 16, 2021 9:45 pm
-
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 0 guests