This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Howdy! from Bryan, TX
-
- 10+ Years
- Posts: 914
- Joined: Fri Jan 12, 2007 3:07 pm
- Zip Code: 77802
- Tractors Owned: The '51
Blue Boy
Scout
a host of parts tractors - Location: Aggieland, Texas
Howdy! from Bryan, TX
About 2 years ago, I wandered into a junk yard and was looking around. No plans, no need, just lookin'... And I saw an old red tractor. It looked a little smaller than most tractors I'd seen, but being a city boy, that didn't mean a whole lot. But there was something about that tractor that just connected with some primal part of me. I paid the man and he would deliver it to the house.
It had a belly mower, so I tried to convince the spouse that I was actually saving money by owning a tractor and cutting my own lawn. 'Course we only have about a 1/4 acre of grass, the rest is pond, trees, deck, driveway etc. But still...
Fast forward 2 years and I decided that the Cub needed new tires. It had a mismatched set of 12" car tires. Everybody knows you don't but radial and bias ply tires on the same vehicle. Well, new tires, required the wheels be painted. Mounting the shiny wheels led me to discover that one of the wheel bearings needed some work. Can you see how this story goes?
I've got a machine shop* in the backyard, so I figured that I ought to be able to tackle anything on the Cub that needs to be repaired. It looks like I may be able to get everything fixed, painted, and back together in time for the next Texas Tumble. Maybe even in time to join the Christmas Parade here in Bryan.
Whenever I'm about to work on the Cub, I stop and ask myself "How would I do this on a farm in 1951?" A little Shade Tree engineering and thought almost always leads to a dirt simple solution. Working on the Cub has given me great respect for the engineers who designed it so long ago and the farmers who used and maintained them.
I'm not usually a "joiner", but I found this group a couple of weeks ago and after lurking for awhile, decided that I'd like to join (if they would have me). As much fun as the Cub can be, this group makes it even sweeter.
I guess that is introduction enough.
Rick Dulas
*The machine shop facilities are available, gratis, to any member of the forum. Just let me know when you are going to be in town and I'll clear some space.
It had a belly mower, so I tried to convince the spouse that I was actually saving money by owning a tractor and cutting my own lawn. 'Course we only have about a 1/4 acre of grass, the rest is pond, trees, deck, driveway etc. But still...
Fast forward 2 years and I decided that the Cub needed new tires. It had a mismatched set of 12" car tires. Everybody knows you don't but radial and bias ply tires on the same vehicle. Well, new tires, required the wheels be painted. Mounting the shiny wheels led me to discover that one of the wheel bearings needed some work. Can you see how this story goes?
I've got a machine shop* in the backyard, so I figured that I ought to be able to tackle anything on the Cub that needs to be repaired. It looks like I may be able to get everything fixed, painted, and back together in time for the next Texas Tumble. Maybe even in time to join the Christmas Parade here in Bryan.
Whenever I'm about to work on the Cub, I stop and ask myself "How would I do this on a farm in 1951?" A little Shade Tree engineering and thought almost always leads to a dirt simple solution. Working on the Cub has given me great respect for the engineers who designed it so long ago and the farmers who used and maintained them.
I'm not usually a "joiner", but I found this group a couple of weeks ago and after lurking for awhile, decided that I'd like to join (if they would have me). As much fun as the Cub can be, this group makes it even sweeter.
I guess that is introduction enough.
Rick Dulas
*The machine shop facilities are available, gratis, to any member of the forum. Just let me know when you are going to be in town and I'll clear some space.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Welcome Rick! I enjoy your tips and tricks very much.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
I'm not usually a "joiner", but I found this group a couple of weeks ago and after lurking for awhile, decided that I'd like to join (if they would have me). As much fun as the Cub can be, this group makes it even sweeter.
Glad you joined Rick. I enjoy your writings and your knowledge .
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- 10+ Years
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
-
- 10+ Years
-
- 10+ Years
- Posts: 88
- Joined: Sun Jan 28, 2007 12:46 pm
- Zip Code: 76087
- Location: Weatherford, TX
-
- 10+ Years
- Posts: 573
- Joined: Sun Oct 01, 2006 5:53 pm
- Zip Code: 77316
- Circle of Safety: Y
- Location: TX, Montgomery
Rick,
Looking forward to meeting you real soon, it'll have to be before the Tumble. That's way too long to live so close without running into each other before then. Work and two babies at home keep my hands tied much of time. If you're still without means of hauling Cubs when the Tumble gets here, we may see if the trailer I borrow from my neighbor down the street will fit two cubs inside it!! Real glad to have to you here and I'm another one who gets a lot out of reading your tips! Thanks!!
Have any luck with getting that Cub from Ft Worth yet?
Dave
Looking forward to meeting you real soon, it'll have to be before the Tumble. That's way too long to live so close without running into each other before then. Work and two babies at home keep my hands tied much of time. If you're still without means of hauling Cubs when the Tumble gets here, we may see if the trailer I borrow from my neighbor down the street will fit two cubs inside it!! Real glad to have to you here and I'm another one who gets a lot out of reading your tips! Thanks!!
Have any luck with getting that Cub from Ft Worth yet?
Dave
53 Cub, C-2 mower, grader blade, cultivators, & a few plows
-
- 10+ Years
- Posts: 1607
- Joined: Sat Jun 03, 2006 8:09 am
- Zip Code: 45387
- Location: Yellow Springs, Ohio
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
-
- 10+ Years
- Posts: 4565
- Joined: Wed Feb 05, 2003 1:18 pm
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
- Location: OH, Sidney
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
-
- 10+ Years
- Posts: 3182
- Joined: Fri Jun 02, 2006 1:57 pm
- Zip Code: 30145
- eBay ID: 9716ron
- Location: Ga, Kingston
Return to “Introduce Yourself”
Who is online
Users browsing this forum: No registered users and 0 guests