Hi, I'm new to this forum, and new to Cub's as well. I just got a 1962 the other day, and I'm looking into a hitch for it. I saw a post here from a few months ago about some specs/dimensions for a 3 pt . Do they exist yet ? If so how can i find them ?
By the way, this cub is in very good shape, nice tight little tractor that could be cleaned up a little, but came with a front grader blade. Works quite well on my driveway.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
3 pt hitch
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 10
- Joined: Tue Mar 09, 2004 7:47 pm
- Location: St. Mary's County, Maryland
-
- Cub Pro
- Posts: 3970
- Joined: Mon Feb 03, 2003 9:54 am
- Zip Code: 16685
- Circle of Safety: Y
- Location: PA, Todd
Welcome Jerry,
Good to see some more Maryland folk showing up here! Don't have any experience with 3 pt on a Cub, but others here do. Here's a company that makes a kit for the Cub and LoBoy.
http://www.worksaver.com/product/hkit3pt.html
Don't be a stranger,
Lurker Carl
Good to see some more Maryland folk showing up here! Don't have any experience with 3 pt on a Cub, but others here do. Here's a company that makes a kit for the Cub and LoBoy.
http://www.worksaver.com/product/hkit3pt.html
Don't be a stranger,
Lurker Carl
-
- 10+ Years
- Posts: 10
- Joined: Tue Mar 09, 2004 7:47 pm
- Location: St. Mary's County, Maryland
3 pt hitch
Carl,
Thanks for the welcome, from what i've seen here this is a good forum , LOTS of info on cub's and some good links as well.
I already checked with worksaver, they have two 3 pt kits available, but they are $630 and $650 PLUS freight ! a bit too pricey for my taste. I can probably get one made nearby for about half that. (i hope)
Thanks for the welcome, from what i've seen here this is a good forum , LOTS of info on cub's and some good links as well.
I already checked with worksaver, they have two 3 pt kits available, but they are $630 and $650 PLUS freight ! a bit too pricey for my taste. I can probably get one made nearby for about half that. (i hope)
-
- 10+ Years
- Posts: 661
- Joined: Wed Mar 05, 2003 9:09 pm
- Zip Code: 18603
- Tractors Owned: 1948 Cub
1955 Cub - Location: PA, Berwick
Jerry. Welcome to the board. Fast hitches were being discussed here on the board recently. Maybe you could do a search for that.
If you have a regular cub and not a lowboy, and a cub 54A blade, that could also be mounted under the belly like a grader. For stone driveways, you would have much better control over the leveling and smoothness.
If you have a regular cub and not a lowboy, and a cub 54A blade, that could also be mounted under the belly like a grader. For stone driveways, you would have much better control over the leveling and smoothness.
Ron
-
- 10+ Years
- Posts: 115
- Joined: Sun Feb 02, 2003 8:09 pm
- Location: Middletown, NJ
I too was looking for a 3 point. I looked at Worksaver but thought it was too costly. I had mine made by a local guy. Works great!. It's set up for a Category 1 hitch. I have since replaced the top bent turnbuckle with a chain attached with bolts at each end. I still need to give specs to Rudi so he can post it on his site (one of these days). As you can see it's just bolted to the drawbar. The 5 foot landscape rake is from Worksaver. Let me know if you need the details.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 325
-
by Peter Person
Thu Apr 20, 2023 1:04 pm
-
- 5
- 743
-
by CapeCodCubs
Thu Jul 29, 2021 9:03 pm
-
- 3
- 254
-
by Scotty777
Mon Aug 09, 2021 3:49 pm
-
- 13
- 1376
-
by SamsFarm
Mon Jun 28, 2021 12:37 am
-
- 2
- 171
-
by Glen
Tue Mar 05, 2024 6:15 pm
Who is online
Users browsing this forum: No registered users and 4 guests