How does one remove the nameplates on a Cub so outfitted. Mine is a 1960 Lo-Boy and has aluminum nameplates on both sides. Want to remove them to paint and want to re-install after painting.
Nameplates are attached through sheet metal with fasteners on the inside.
What will I use to refasten?
Thanks
Kajun
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Removing and re-installing Cub nameplates
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 149
- Joined: Mon Jul 14, 2003 4:02 pm
- Zip Code: 70775
- Location: St. Francisville , La
-
- 10+ Years
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
Kajun,
Whatever you do, don't try to pry them off from the outside. Tap the end of the pins a little at a time from the inside and you'll avoid breaking them off. After the pins are out, the fasteners can be removed by squeezing them with pliers. I've never removed one that couldn't be re-used.
Whatever you do, don't try to pry them off from the outside. Tap the end of the pins a little at a time from the inside and you'll avoid breaking them off. After the pins are out, the fasteners can be removed by squeezing them with pliers. I've never removed one that couldn't be re-used.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
-
- 10+ Years
- Posts: 149
- Joined: Mon Jul 14, 2003 4:02 pm
- Zip Code: 70775
- Location: St. Francisville , La
Removing and re-installing Cub nameplates
Guys :
Many thanks for the help. Dealer does have . I also appreciate the sugg./guidance about how to get them off.
kajun
Many thanks for the help. Dealer does have . I also appreciate the sugg./guidance about how to get them off.
kajun
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Removing the TC without removing the hood Attachment(s)
by Bill Hudson » Sun Oct 16, 2022 6:20 pm » in Farmall Cub - 7
- 317
-
by Bill Hudson
Mon Oct 17, 2022 11:43 am
-
-
- 3
- 200
-
by Tractor Rod
Wed Jan 12, 2022 2:54 pm
-
-
Installing Rear Wheel Weights Attachment(s)
by MarrColton » Fri Jul 16, 2021 7:47 am » in Farmall Cub - 5
- 515
-
by randyny
Thu Jul 29, 2021 7:33 pm
-
-
- 4
- 320
-
by wrz
Wed Feb 23, 2022 3:50 pm
-
- 7
- 284
-
by tst
Thu Nov 30, 2023 9:40 am
Who is online
Users browsing this forum: Milli and 3 guests