This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Installing clutch assemby
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 178
- Joined: Sat Feb 28, 2004 2:16 pm
- Location: Guerneville CA
Installing clutch assemby
I don't have a pilot shaft. How can I install the clutch assembly?
Steve Ruddy
Guerneville CA
Guerneville CA
-
- 10+ Years
- Posts: 1224
- Joined: Sun Feb 02, 2003 1:11 pm
- Zip Code: 28001
- Location: Albemarle, North Carolina 28001
-
- 10+ Years
- Posts: 178
- Joined: Sat Feb 28, 2004 2:16 pm
- Location: Guerneville CA
-
- Cub Pro
- Posts: 305
- Joined: Mon Feb 03, 2003 8:28 pm
- Zip Code: 43420
- Location: FREMONT OHIO
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
I put one together loose, and then tightened it after assembled, works but a little tedious. I later went to an auto supply place, and got a $4.95 plastic alignment tool. They had one that would fit the pilot bushing, but not the splines, so I stuck it in a drill, and turned it against a grinder until I had it worn down enough to go through the disk. It didn't fit the plines, but all thet was needed was for it to hold the disk centered, slipping into splines wasn't critical.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 200
-
by Tractor Rod
Wed Jan 12, 2022 2:54 pm
-
-
Installing Rear Wheel Weights Attachment(s)
by MarrColton » Fri Jul 16, 2021 7:47 am » in Farmall Cub - 5
- 514
-
by randyny
Thu Jul 29, 2021 7:33 pm
-
-
- 18
- 333
-
by Dale Finch
Wed Apr 17, 2024 9:28 pm
-
- 7
- 373
-
by kully560
Sun Jan 22, 2023 2:24 pm
-
- 1
- 136
-
by Jim Becker
Thu Jan 19, 2023 9:59 pm
Who is online
Users browsing this forum: No registered users and 2 guests