Hi, hope someone can help.
What size bolts are used to attach the differential shaft housing to the final drive and the transmission? I don't find any reference to them in the parts catalog. The ones I removed are obviously not original.
I finally made some progress in reassambling my cub which I took almost completly apart Feb 03. I have both final drives ready to be reattached to the tranny etc.
All were parts pressure vatted and bead blasted to remove all rust and old paint. All seals and bearings in the final drives were replaced. As soon as I reassemble the transmission and the bell housing I'll have her on jack stands and it might resemble a tractor again!
Thanks for any help.
Sam
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
This is a "re-bolting" situation!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 40
- Joined: Sun Mar 02, 2003 1:08 pm
- Location: Georgia, Smyrna
-
- 10+ Years
-
- 10+ Years
- Posts: 40
- Joined: Sun Mar 02, 2003 1:08 pm
- Location: Georgia, Smyrna
Who is online
Users browsing this forum: No registered users and 4 guests