This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
oil leak
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 732
- Joined: Sun Mar 14, 2004 10:00 pm
- Zip Code: 70403
- Location: LA, Hammond
oil leak
There's been an oil leak on 'Popeye' where the magneto bolts onto the governor. I tried tightening the bolts, but no luck. When taking off the magneto, oil spilled out of the cavity. Is there supposed to be oil there?
-
- 10+ Years
- Posts: 732
- Joined: Sun Mar 14, 2004 10:00 pm
- Zip Code: 70403
- Location: LA, Hammond
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
The oil port on the magneto feeds a wick system that lubricates the magneto bearings. When you remove the magneto there is an oil seal inside the governor housing that the shaft that drives the magneto extends through. This seal probably needs replacing. The instructions for it are in the manuals on Rudi's web site.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 732
- Joined: Sun Mar 14, 2004 10:00 pm
- Zip Code: 70403
- Location: LA, Hammond
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- 10+ Years
-
- 10+ Years
- Posts: 732
- Joined: Sun Mar 14, 2004 10:00 pm
- Zip Code: 70403
- Location: LA, Hammond
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- 10+ Years
- Posts: 178
- Joined: Sat Feb 28, 2004 2:16 pm
- Location: Guerneville CA
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
Steve Ruddy wrote:I'm doing the same thing now but the manual doesn't specify which side to install the seal from. Also what are you using to hammer it in?
Steve,
The seal is intended to keep the oil inside the engine, so the "open" side is toward the governor. A hardwood stick with an "L" shaped notch cut for a stop will serve to position the seal and also stop it at the proper depth. Without looking it up, I think the offset stop should be at 23/32". Be really sure you have the governor properly timed BEFORE you install the seal.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
- Posts: 178
- Joined: Sat Feb 28, 2004 2:16 pm
- Location: Guerneville CA
Be really sure you have the governor properly timed BEFORE you install the seal.
I wish I would have waited for a reply I just came back in and the governor isn't installed yet. Hopefully I'll be OK because I have the front end disasembled as well. I ruined one seal trying to put in with a metal punch but luckily I had two and the second one I used wood cut with a hole saw and measured the depth with a printers ruler. I like Georges suggestion much better though. Let's see what else I can screw up.
Steve Ruddy
Guerneville CA
Guerneville CA
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
John, it says "Always listen to good advice".
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 339
-
by Glen
Tue May 18, 2021 9:50 pm
-
- 17
- 720
-
by Glen
Wed Sep 01, 2021 9:00 pm
-
- 3
- 146
-
by Barnyard
Tue Jun 27, 2023 5:48 pm
-
- 3
- 194
-
by Dale Finch
Sat May 22, 2021 2:38 pm
-
- 16
- 567
-
by MattS
Thu Mar 30, 2023 11:53 am
Who is online
Users browsing this forum: No registered users and 8 guests