This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
hydraulics
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1
- Joined: Mon Aug 09, 2004 7:07 pm
hydraulics
hello everyone this forum is a goldmine of information....here is my problem-i am restoring a 1951 cub and rebuilt the engine and hydraulics this winter-all was well engine ran and rock shaft worked fine. this summer i am finishing up the rest of the tractor and solving some minor leaks (hydraulic pump). i removed the pump to reseal it at the block then i put it together-no more leak. awhile later working out other minor bugs i proceeded to go thru the bleed procedure. the problem is the rockshaft goes down fine but comes up extremely slow with no strength-any suggestions?-thanks hugh
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
I would guess that one of the regulator valves is stuck.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8
- 225
-
by Josh_boro
Mon Aug 07, 2023 9:06 pm
-
- 14
- 637
-
by Jim Becker
Tue May 09, 2023 12:06 pm
-
- 8
- 339
-
by Dale Finch
Sun Jul 18, 2021 12:59 pm
-
- 30
- 1137
-
by LyleDoe
Sun Mar 13, 2022 10:58 am
-
- 2
- 162
-
by tst
Wed May 12, 2021 10:39 pm
Who is online
Users browsing this forum: No registered users and 3 guests