This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Oil pan leaks
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 422
- Joined: Sun Jul 18, 2004 7:49 pm
- Location: Watkins Glen, NY
Oil pan leaks
Does anyone have a simple fix for oil pan seeps around a brand new gasket? I thought I put enough gasket goo on the cork gasket before installing but there are oil seeps around the bolt heads. When the bolts were tightened down, the gasket bulges in those places which is where the oil is coming from.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- Cub Pro
- Posts: 1952
- Joined: Tue Mar 11, 2003 9:16 pm
- Zip Code: 85615
- Tractors Owned: 6 Cubs and no mas.
1947 Circle series Farmall Cub with Armstrong lift, belt pulley, 5"rims 6" tires, SN 563
1949 Farmall Cub with high crop option and hydraulics
1955 Farmall Cub with fast hitch
1955 International Cub Loboy with fast hitch
1957 Farmall Cub with fast hitch
1959 Farmall Cub with fast hitch - Location: way high up in the Huachuca Mt. at the bottom of a deep dark canyon
-
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
Oil pan
John,
I've got mine off right now, and I'm going to work on it today...
How good is good enough? Mine appears to be straight, but it has a little roughness and pitting around the outside of the gasket edge. The previous gasket that was on there leaked a ton of oil, even out the back side and down into the clutch housing...
Should I be using goo, or just polishing up the surfaces with 0000 steel wool or something like that and using the new gasket - dry or with a light coat of new oil on it...?
I've got mine off right now, and I'm going to work on it today...
How good is good enough? Mine appears to be straight, but it has a little roughness and pitting around the outside of the gasket edge. The previous gasket that was on there leaked a ton of oil, even out the back side and down into the clutch housing...
Should I be using goo, or just polishing up the surfaces with 0000 steel wool or something like that and using the new gasket - dry or with a light coat of new oil on it...?
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
The main thing is to make sure it is straight, with no high spots around the bolts, etc. When I put my 48 together aobut 17 years ago I used gasket sealer on the pan side, but not on the block side. May not have needed it, but it has been there ever since.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
just to add to what John said....
the most important thing is to bang the pan back into shape. i put ithem on the concrete floor and use a small ball peen hammer, then i put silicone on both surfaces (but don't be sloppy), being certain they are clean and oil free. do NOT overtighten the bolts on reinstallation, they will simply bend the pan and bulge the gasket again.
have fun with the 3 in the back
the most important thing is to bang the pan back into shape. i put ithem on the concrete floor and use a small ball peen hammer, then i put silicone on both surfaces (but don't be sloppy), being certain they are clean and oil free. do NOT overtighten the bolts on reinstallation, they will simply bend the pan and bulge the gasket again.
have fun with the 3 in the back
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
- 10+ Years
- Posts: 422
- Joined: Sun Jul 18, 2004 7:49 pm
- Location: Watkins Glen, NY
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
3 in the back
I had to go buy a "universal joint" for my socket, I couldn't find mine, and "the three in the back" were covered in oil and 50 years of snot, and there was no way they were coming out without one.
My dad used to have a flexible "whip" about 4-6 inches long, sort of a super-duty gooseneck that was the best socket extension I've seen, but I can't find a new one anywhere (and Lord knows where his went.)
I *hate* losing tools... Usually happened when the significant other said "Oh, sure, he wouldn't mind if you borrowed his <whatever>", then I never see it again.
My dad used to have a flexible "whip" about 4-6 inches long, sort of a super-duty gooseneck that was the best socket extension I've seen, but I can't find a new one anywhere (and Lord knows where his went.)
I *hate* losing tools... Usually happened when the significant other said "Oh, sure, he wouldn't mind if you borrowed his <whatever>", then I never see it again.
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
-
- 10+ Years
- Posts: 422
- Joined: Sun Jul 18, 2004 7:49 pm
- Location: Watkins Glen, NY
-
- Posts: 4
- Joined: Thu Jul 30, 2020 5:01 am
- Zip Code: 00000
Re: Oil pan leaks
I actually put studs in the back last time I split the tractor, you still need to wrestle with getting in there with tooling but it’s much easier to start the nuts on exposed studs then to start bolts through a gasket and goo, while it’s starting to cure.
Note, I had to do some dry runs to make sure the studs weren’t too long.
Note, I had to do some dry runs to make sure the studs weren’t too long.
-
- 5+ Years
- Posts: 129
- Joined: Mon Sep 04, 2017 11:12 am
- Zip Code: 01007
- Tractors Owned: 49 Cub,57Cub, 57 Low Boy, 48 BN, 48 Ford8N, 49Ford 8N, 56 Massey Harris 50, 58 MF 65, 77 MF 265
- Circle of Safety: Y
- Location: Belchertown, MA
Re: Oil pan leaks
I use a 1/4 drive with a "u Joint" and a long extension and put a little clay on the joint to stiffen it up.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Oil pan leaks
I put the oil pans, valve covers on a flat surface and use a narrow piece of wood and tap the wood to make the mounting surface flat and parallel again. These pans and covers become distorted from over tightening. The cork gasket can ooze out between the bolt holes too. On the gasket surface I use the 3 m weather stripping adhesive on the pan side. This glues the gasket to the pan/covers. You can remove it many times without replacing the gasket.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 360
- Joined: Fri Feb 04, 2005 7:20 pm
- Zip Code: 08876
- Tractors Owned: 1953 F-Cub
1957 F-Cub
1956 Lo-Boy
1971 Cub Cadet 149
1976 Cub Cadet 1200 - Circle of Safety: Y
Re: Oil pan leaks
Don’t use silicone for any oil pans/oil pan gaskets. If you feel you need any type of “sealant” with the cork gasket use Permatex Aviation Form-A-Gasket sold at NAPA. Comes in a small can with a brush inside can.
Personally I like the gaskets with rubber impregnated ones. To make sure you get a good seal all surface must be clean and free of all old gasket material and oil. Use Brake Cleaner or other solvent to clean all surfaces.
Silicone is for sealing water out and doesn’t work well with high temperatures and oils....Engine manufactures use specialty designed sealants and silicone isn’t one of them.
Also don’t over torque the 3 rear oil pan bolts because they are screwed into the rear oil seal housing which is made of Aluminum. Follow the correct torque spec on these bolts or you will stripped them out.
NJ Farmer
Personally I like the gaskets with rubber impregnated ones. To make sure you get a good seal all surface must be clean and free of all old gasket material and oil. Use Brake Cleaner or other solvent to clean all surfaces.
Silicone is for sealing water out and doesn’t work well with high temperatures and oils....Engine manufactures use specialty designed sealants and silicone isn’t one of them.
Also don’t over torque the 3 rear oil pan bolts because they are screwed into the rear oil seal housing which is made of Aluminum. Follow the correct torque spec on these bolts or you will stripped them out.
NJ Farmer
-
- 501 Club
- Posts: 1120
- Joined: Sun Nov 10, 2019 5:14 pm
- Zip Code: 29848
- Tractors Owned: Yanmar YM2000
Yanmar YM186 (non running)
1952 Farmall Cub - Circle of Safety: Y
- Location: Greenwood County SC
Re: Oil pan leaks
you are correct , silicone is not for oil but for water. The kind of silicone you buy in a tube at HD or Lowe's. But I encourage you to go read your tubes of RTV silicone at the auto parts stores. There is blue, red, black, grey, and ultra of each color. If you look they are rated for oils. Each color may not be but each tube lists applications. I know for a fact that grey and black (ultra grey and black are my go tos) are rated for oil applications. I use them all the time and only the RTV silicone. Use them on my other tractor when replacing wheel flanges, hydraulics where a gasket is. Not a leak. On my old 4wd I use it on the differential alone. I have no leaked out of my differential after years when I last opened them up. You need to follow the directions on a tube. 90% of people use it wrong and it's user error. Personally I put thin complete coats on each side of a mating surface..thicker if I know there is imperfections. Now this is the part no one does and usually you get away without doing it but not always. You hand tighten the bolts finger tight till the basket just starts to squeeze out. Leave it for an hour in normal summer temps to allow it to set up. Then you come back after that time and torque it to your spec. Then YOU ARE NOT supposed to put oil in it for like 12 to 24 hours if I remember right. The last step though to me is not as important as letting it cure before you torque it...if you actually did this step. But you want it to set up so it has material to compress.NJ Farmer wrote:Don’t use silicone for any oil pans/oil pan gaskets. If you feel you need any type of “sealant” with the cork gasket use Permatex Aviation Form-A-Gasket sold at NAPA. Comes in a small can with a brush inside can.
Personally I like the gaskets with rubber impregnated ones. To make sure you get a good seal all surface must be clean and free of all old gasket material and oil. Use Brake Cleaner or other solvent to clean all surfaces.
Silicone is for sealing water out and doesn’t work well with high temperatures and oils....Engine manufactures use specialty designed sealants and silicone isn’t one of them.
Also don’t over torque the 3 rear oil pan bolts because they are screwed into the rear oil seal housing which is made of Aluminum. Follow the correct torque spec on these bolts or you will stripped them out.
NJ Farmer
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Carb Leak, then it leaks again Attachment(s)
by AndrewSpencer » Tue Apr 12, 2022 9:02 am » in Farmall Cub - 6
- 317
-
by Matt Kirsch
Mon Apr 18, 2022 2:08 pm
-
Who is online
Users browsing this forum: No registered users and 3 guests