This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
240 utility engine in Super C
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 43
- Joined: Sun Feb 27, 2005 7:54 pm
- Zip Code: 00000
- Circle of Safety: Y
- Location: Fl, Highland City
240 utility engine in Super C
I have a Super C with a bad engine. I have a good engine from a 240 utility. Is it possible to install the 240 utility engine in my Super C?
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 240 utility engine in Super C
Does the 240 have a135 in it ? If so it may not fit,Ihave a 330 U with a 135 in it and the back of the engine is wider where the toque tube bolts. But they also made a 135 that would fit.
David
David
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 43
- Joined: Sun Feb 27, 2005 7:54 pm
- Zip Code: 00000
- Circle of Safety: Y
- Location: Fl, Highland City
Re: 240 utility engine in Super C
Tractor Data.com says that 240 has a 123 cu.in. engine.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 240 utility engine in Super C
It should work fine the 123 is what is in the super C
David
David
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub
- Posts: 17282
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: 240 utility engine in Super C
The C-123 used in the 140/240 and later has a water pump mounted on the block, similar to later model car engines. Connections to the radiator are different and may cause you a problem with the Super C radiator.
-
- 10+ Years
- Posts: 47
- Joined: Sun Nov 04, 2007 2:53 pm
- Zip Code: 22728
- Location: VA, Midland
Re: 240 utility engine in Super C
Sorry for the tardy reply, been a long year... But thought I'd offer some notes.
The back of the block will bolt right in, but the front is a different matter. Make sure the 240 motor is complete, as you will need to bring over all the new style accessories with the motor, then find a 140 donor for the radiator and it's bracket. And make sure we are dealing with a Super C vs a straight C or the grill will be to short. Match the air cleaner to which manifold you use as they align differently.
I've done this swap before, it's possible; but the motors are not a direct swap. As Jim mentioned, the blocks are different which requires a new water pump and pulley arrangement. Everything is driven from a single thin belt vs the two belts used on the Super C. The upper water neck and the radiator inlet are also at different angles which requires the 140 radiator replacement.
The back of the block will bolt right in, but the front is a different matter. Make sure the 240 motor is complete, as you will need to bring over all the new style accessories with the motor, then find a 140 donor for the radiator and it's bracket. And make sure we are dealing with a Super C vs a straight C or the grill will be to short. Match the air cleaner to which manifold you use as they align differently.
I've done this swap before, it's possible; but the motors are not a direct swap. As Jim mentioned, the blocks are different which requires a new water pump and pulley arrangement. Everything is driven from a single thin belt vs the two belts used on the Super C. The upper water neck and the radiator inlet are also at different angles which requires the 140 radiator replacement.
52 Super M, 53 Super H, 52 Super C, Wheel horse C101, JD 140.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 24
- 5491
-
by Magnum
Mon Jan 23, 2023 11:03 pm
-
- 5
- 1430
-
by MD200460
Tue Oct 04, 2022 2:47 pm
-
- 3
- 959
-
by ajhbike
Tue Aug 30, 2022 6:05 pm
-
- 1
- 1137
-
by Eugene
Fri Nov 19, 2021 9:52 pm
-
-
Super C Steps and 3pt Attachment(s)
by ajhbike » Thu Dec 28, 2023 4:44 pm » in Farmall C, Super C, 200 & 230 - 5
- 852
-
by ajhbike
Thu Dec 28, 2023 7:07 pm
-
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 2 guests