I don't know if this is what it is called but I'll try to describe it.
My brother-in-law has a B that has a lift system the appears to run off the exhaust. He is not sure if all the parts are there. Does anyone have pix of anything like this or know where I can find them. That is If I am talking about the right thing.
I figure if I help him with this I might have a better chance of weaseling him out of...I mean dealing with him on getting that buzz saw/stationary engine he has sitting around collecting rust.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall B vacuum lift
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub
- Posts: 24281
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Farmall B vacuum lift
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Farmall B vacuum lift
Bill - I believe Cub-Bud recently rebuilt an exhaust lift for his B. I think Jim Becker also may have the information you are looking for.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Team Cub Guide
- Posts: 3544
- Joined: Sun Feb 02, 2003 6:30 pm
- Zip Code: 38658
- eBay ID: Cub-Bud
- Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
- Circle of Safety: Y
- Location: MS, Pope
Re: Farmall B vacuum lift
I have yet to complete mine....Jim Becker and Phil Lenke (PWL) each have operational exhaust lifts.
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"
Greg Norman
Greg Norman
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall B vacuum lift
Here is a link to a manual
http://home.centurytel.net/ejpuckett/exhaust%20lift/
http://home.centurytel.net/ejpuckett/exhaust%20lift/
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Team Cub
- Posts: 24281
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Farmall B vacuum lift
Thanks John, that shuold be exactly what my bil needs. I am much appreciative. Even more so if he would relinquish ownership of that engine I keep eyeing.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
-
- Team Cub
- Posts: 17309
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Farmall B vacuum lift
The parts for the pneumatic lift are in the tractor Parts Catalog. There were 2 variations of the system (related to control handle and linkage), both are in the catalog. John's manual is of the later style.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
-
- 10+ Years
- Posts: 1254
- Joined: Wed Aug 31, 2005 5:10 pm
- Zip Code: 03574
- eBay ID: farmallkid48
- Skype Name: farmall_kid
- Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy - Location: NH, Bethlehem
Re: Farmall B vacuum lift
I have a manual but I don't know if it is the older or newer style, I also have some pictures from Red Power a few years back on a nice setup, but not the vertical lift... I'v been wanting to put mine together to maybe use with the JD #5 mower to lift, but haven't had the time to put all the parts together, my exhaust valve needs some work anyways...
Phil, I like the way yours looks, are those nylon "washers" there on the valve/arm?
Johnny
Phil, I like the way yours looks, are those nylon "washers" there on the valve/arm?
Johnny
70 Brockway 361
http://photobucket.com/albums/c47/jostev/
http://photobucket.com/albums/c47/jostev/
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: Farmall B vacuum lift
Yes they are nylon.
Johnny
That is the bowl I bought from you a few years back. reconditioned it.
Phil
Johnny
That is the bowl I bought from you a few years back. reconditioned it.
Phil
"Work Hard ,Play Often,Care Always"
-
- 10+ Years
- Posts: 1254
- Joined: Wed Aug 31, 2005 5:10 pm
- Zip Code: 03574
- eBay ID: farmallkid48
- Skype Name: farmall_kid
- Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy - Location: NH, Bethlehem
Re: Farmall B vacuum lift
Phil, how did you get the shaft coming out of the bowl to seal well? or was it just a good fit? I have mine on the tractor, just not really hooked up to anything, and it leaks like crazy around the shaft. I was thinking of just putting some of that 2 part putty type exhaust epoxy in there, then putting it together and moving the shaft, then take it back apart and wait for it to harden, or just braze it up a bit then machine it down...?
Johnny
Johnny
70 Brockway 361
http://photobucket.com/albums/c47/jostev/
http://photobucket.com/albums/c47/jostev/
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: Farmall B vacuum lift
I put a thin piece of fiberglass cloth around there.
Phil
Phil
"Work Hard ,Play Often,Care Always"
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 120
-
by Jim Becker
Tue Apr 09, 2024 10:38 pm
Who is online
Users browsing this forum: No registered users and 0 guests