This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Dyno Ratings
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 1741
- Joined: Tue Jul 18, 2006 9:55 pm
- Zip Code: 37087
- Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower
1974 Cub S/N 244814
w/59 Woods Mower
Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI - Circle of Safety: Y
- Location: TN, Lebanon
Dyno Ratings
OK guys, I was there in person and was a witness to the tests run on "Cubota", "Flamey" and others. All I saw were numbers on a clipboard. We want HP rating after the numbers were crunched.
We fans of these cubs want (yes, demand!) results of the test.
BIGHOSS
We fans of these cubs want (yes, demand!) results of the test.
BIGHOSS
"Courage is being scared to death-but saddling up anyway".......John Wayne
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Dyno Ratings
Guess I better get busy and enter the numbers into the computer and transfer them here Hey Bighoss, I didn't get to shake your hand, did I ????
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Dyno Ratings
Here's CUBOTA's readings. You'll notice the excel graph that we made up for a normal cub stops at 2500 rpm's. Note: CUBOTA is not normal There's no way for me to enter the rest of the chart up to the 3000rpm's that we started with on CUBOTA. I don't have the smarts to create a new graph, so you'll have to guess at the outcome
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Dyno Ratings
Nutz, I get an error bar that says "xlxs" is not allowed as an attachment
any ideas???
edit: it says xlsx, not xlxs
any ideas???
edit: it says xlsx, not xlxs
Last edited by Rick Prentice on Mon May 11, 2009 11:51 am, edited 1 time in total.
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Dyno Ratings
Rick - send Dennis a PM. I'm sure that at one time XLS files were permissible.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Dyno Ratings
.xls files are allowed, don't know about .xlxs? (was this a typo??) Convert it to a .pdf and it will upload.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Dyno Ratings
Any other fcub numbers???
Someday i'd like to build a C60 and have it on the dyne. I have a feeling we can get some higher numbers out of it with some tricks i learned in the past. I wish our old flat head guru was still alive from the old dirt track stock days to get some advise from. He had an old flat head ford v8 running head to head with the 350 chevy's on the track. Of course its the driver and the suspension too but the power comes from the engine.
Someday i'd like to build a C60 and have it on the dyne. I have a feeling we can get some higher numbers out of it with some tricks i learned in the past. I wish our old flat head guru was still alive from the old dirt track stock days to get some advise from. He had an old flat head ford v8 running head to head with the 350 chevy's on the track. Of course its the driver and the suspension too but the power comes from the engine.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- Cub Pro
- Posts: 1741
- Joined: Tue Jul 18, 2006 9:55 pm
- Zip Code: 37087
- Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower
1974 Cub S/N 244814
w/59 Woods Mower
Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI - Circle of Safety: Y
- Location: TN, Lebanon
Re: Dyno Ratings
Rick,
I'm pretty sure that we shook hands, but don't remember for sure. I watched you work on several carbs, one that Dale had was mine. You were going to make up a gas line for me also, but I had to leave and don't know if you got to it. I left Dale in charge of taking care of it, in case you made it. You were a busy man. Thanks for all you did at the "Bash".
I'm the one that you got the small hyd cylinders from.
BIGHOSS
Ron Smith
I'm pretty sure that we shook hands, but don't remember for sure. I watched you work on several carbs, one that Dale had was mine. You were going to make up a gas line for me also, but I had to leave and don't know if you got to it. I left Dale in charge of taking care of it, in case you made it. You were a busy man. Thanks for all you did at the "Bash".
I'm the one that you got the small hyd cylinders from.
BIGHOSS
Ron Smith
"Courage is being scared to death-but saddling up anyway".......John Wayne
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Dyno Ratings
I'm the one that you got the small hyd cylinders from.
I remember you now. Guess I didn't here you say Bighoss. I was just out looking over the cylinders and daydreaming
Thanks Ron,
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Dyno Ratings
Was kindof a typo. It say xlsx instead . Must be something new the engineers thought up to acquire more money down the road.xls files are allowed, don't know about .xlxs? (was this a typo??) Convert it to a .pdf and it will upload.
Now if I could find how to convert to pdf
Raymond, Dennis is trying to get things ironed out over in the "Testing Forum" for me.
Thanks,
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Dyno Ratings
Rick,
If you e-mail the data and graph file to me I can both fix your graph and save to a pdf for you. Side effect of being an engineer - proficiency in Excel and manipulating data.
Bill
If you e-mail the data and graph file to me I can both fix your graph and save to a pdf for you. Side effect of being an engineer - proficiency in Excel and manipulating data.
Bill
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Dyno Ratings
Rick Prentice wrote:Was kindof a typo. It say xlsx instead . Must be something new the engineers thought up to acquire more money down the road.xls files are allowed, don't know about .xlxs? (was this a typo??) Convert it to a .pdf and it will upload.
Now if I could find how to convert to pdf
Raymond, Dennis is trying to get things ironed out over in the "Testing Forum" for me.
Thanks,
Rick
I just never heard of a .xlxs excel file!! New to me! I can also convert to pdf if you need.
Thanks,
Raymond
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Dyno Ratings
Bill, I just sent you some results. Send me the Excel conversion for Dummies manual, will you
Thanks abunch, I still want to get this stuff figured out so I can do it, maybe
Rick
Thanks abunch, I still want to get this stuff figured out so I can do it, maybe
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Dyno Ratings
I'm still working and waiting on some tweeking, but you can get an idea of the results if you squint or put on your bi-focalsHere's CUBOTA's readings. You'll notice the excel graph that we made up for a normal cub stops at 2500 rpm's. Note: CUBOTA is not normal There's no way for me to enter the rest of the chart up to the 3000rpm's that we started with on CUBOTA. I don't have the smarts to create a new graph, so you'll have to guess at the outcome
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Dyno Ratings
Again, sorry for the poor quality. This is FLAMEY's results.
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
Who is online
Users browsing this forum: No registered users and 3 guests