I have 3 oil pressure gauges.
333722-R91 came with the '49 when I got it. It has no numbers, just an indication for IDLE and RUN. The glass is cracked on that one, and it always seemed to go to the IDLE after running up to temp. I took that one off and replaced it with 364665-R92, that one came off my '67 Loboy. It has numbers 0 to 75. This one would also go to what I considered low pressure @ 15lbs. when up to temp.
When I was visiting with Rudi this summer he gave me another gauge. The 31041-08 (looks exactly like the one I had on the '44 A) This one has no numbers, but has a "RED" zone at the lower end. I installed it last week and so far after running under good power pushing snow for an hour or so, it indicates less than half, but nowhere near the red zone. I'm feeling good about that.
Are any of these gauges proper for the '49?
She's running real sweet, no smoke, except white when it's 25 to 30 below. I'm running 10W-30.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Correct Oil Pressure Gauge?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Correct Oil Pressure Gauge?
Just Do It !
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
My 49 has the unmarked gauge with the red zone. As far as I know, it is the original gauge.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- 10+ Years
- Posts: 238
- Joined: Fri Feb 28, 2003 4:15 pm
- Location: Clarksburg md
-
- 10+ Years
- Posts: 146
- Joined: Mon Aug 02, 2004 11:31 pm
- Location: Illinois
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
nosih,
Thanks for the info.
I thought those last 2 characters might be -DB, but was not sure as it was a little hard to read from it's position on the tractor.
I'm feeling really good now.
When Rudi handed this one to me, there was some oil inside the glass, is this a problem? The oil seems to have leaked out while on the shelf for the last 5 months, and I don't see any new oil getting in.
Thanks for the info.
I thought those last 2 characters might be -DB, but was not sure as it was a little hard to read from it's position on the tractor.
I'm feeling really good now.
When Rudi handed this one to me, there was some oil inside the glass, is this a problem? The oil seems to have leaked out while on the shelf for the last 5 months, and I don't see any new oil getting in.
Just Do It !
-
- Team Cub
- Posts: 17304
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 255
-
by Dale Finch
Tue Sep 07, 2021 8:19 am
-
- 9
- 1127
-
by Clemsonfor
Mon Dec 27, 2021 9:21 pm
-
- 3
- 243
-
by Cubfriend
Mon Dec 06, 2021 9:38 pm
-
- 2
- 229
-
by Gary Dotson
Wed Mar 16, 2022 7:28 am
-
- 9
- 299
-
by Gary Dotson
Sat Aug 21, 2021 6:26 am
Who is online
Users browsing this forum: No registered users and 1 guest