Hi there, \
I have a broken housing on an H4 magneto. I have another housing to use, but I cannot get the impulse coupler off. I tried to fabricate a puller out of a 9/16, 18 TPI bolt. But the thread inside the coupler must be 19 or 20 ?? TPI. An unusual size. Does anyone know were I could purchase a puller to get this thing off??
Thanks so much for any help...Tom
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
H4 magneto question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
H4 magneto question
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
-
- Cub Pro
- Posts: 4436
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: H4 magneto question
John *.?-!.* cub owner, a member here on the forum has a friend that makes them. I'm sure he'll be along shortly with the info.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- Cub Pro
- Posts: 4436
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: H4 magneto question
Tom, just found out that the fella that made them sold out. PM me your address and I'll send you mine to use.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: H4 magneto question
The man that made them for me, will only make them If I can get an order for several. So it will be a while. I believe WK was thinking about getting some made, but not sure.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
Re: H4 magneto question
Thanks so much....Put me down for a standing order for one..
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
-
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
Re: H4 magneto question
Screwstick wrote:Tom, just found out that the fella that made them sold out. PM me your address and I'll send you mine to use.
Thank you so much...PM sent....Tom
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
-
- 10+ Years
Re: H4 magneto question
Earl has at least a dozen made and ready to go. 740-969-2927 25.00 to include shipping
-
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
Re: H4 magneto question
WKPoor wrote:Earl has at least a dozen made and ready to go. 740-969-2927 25.00 to include shipping
Thanks...going to call tomorrow
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
-
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
Re: H4 magneto question
Wow..got the puller today. Professional quality, A1 Craftsmanship, Grade 8 bolt. If you were on the fence about ordering one of these from Earl, don"t hesitate. This tool is well worth $25. Thank you ...Tom
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
-
- Cub Pro
- Posts: 4436
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: H4 magneto question
Tom, I was just about to send you a message to see if everything worked out with Earl, and looks like it did. The puller makes a world of difference when working on the Mag. Makes a hard job easy! Glad it worked out.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
Re: H4 magneto question
Screwstick wrote:Tom, I was just about to send you a message to see if everything worked out with Earl, and looks like it did. The puller makes a world of difference when working on the Mag. Makes a hard job easy! Glad it worked out.
Thanks Ray...Tom
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 1471
-
by jc-ih
Fri Aug 06, 2021 12:34 am
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 1 guest