This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
'72 IH Cub Restoration
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 10
- Joined: Mon Jan 03, 2005 8:52 pm
- Location: Orlando, Florida
'72 IH Cub Restoration
Have begun to disassemble my CUB for painting & am running into the usual problems; like removing the PTO pulley. It is the type with 2 little bolts locking the pulley to the shaft. And would also like to find a site or actual photos to assist me with returning the tractor to as close to original as possible. Would appreciate ANY & ALL comments from your persoanl experiences. Thanks to all!
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
the pulley has a tapered center hub. As the bolts pull the pulley onto the hub it clamps down on the shaft. To remove it move the two bolts to the shallow threaded holes. turn them in a little at a time, first one then the other so the pressure is even. they will push the sheave (pulley) off the hub toward the tractor. as it slides off the hub will loosen on the shaft. May have to tap the hub a time or two to finally loosen it.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 10
- Joined: Mon Jan 03, 2005 8:52 pm
- Location: Orlando, Florida
Good info!
Thank you... that worked perfectly, however I think the "hub" will need a little persuasion with some liquid loosener or a wheel puller.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Probably a little rust on it. spray some penetrating oil on it and let it set a day or two, then tap it with a small hammer. the tapping is as much to loosen the rust as it is to move the hub. If you will look, the hub has 2 splits. If there is enough room to get to them try diving something in to spread thsme jsut a little.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Nice. That is a year newer than mine.
You will find the folks on this board are the absolute best in the world.
A couple of recommendations:
Try a search for answers, lots of questions are saved in the archives.... someone has been there before. Don't let it stop you from asking again.
Take LOTS of pictures with a digital camera. I found this helpful with a rework of a snowmobile. It costs nothing but time and is well worth it. Helps you feel better later when you see how 'bad' it was to begin with.
Enjoy!
You will find the folks on this board are the absolute best in the world.
A couple of recommendations:
Try a search for answers, lots of questions are saved in the archives.... someone has been there before. Don't let it stop you from asking again.
Take LOTS of pictures with a digital camera. I found this helpful with a rework of a snowmobile. It costs nothing but time and is well worth it. Helps you feel better later when you see how 'bad' it was to begin with.
Enjoy!
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1
- 160
-
by Magnum
Tue Feb 21, 2023 8:59 pm
-
- 13
- 644
-
by Glen
Sat Aug 28, 2021 1:25 am
-
- 4
- 217
-
by electricjake
Sun Jan 02, 2022 3:14 pm
-
-
Cub demonstrator restoration Attachment(s)
by lgt_hunter » Sat Oct 29, 2022 2:56 pm » in Farmall Cub - 6
- 315
-
by lgt_hunter
Sun Oct 30, 2022 10:22 am
-
-
-
First Implement Restoration Attachment(s)
by darkmuncan81 » Sun Nov 06, 2022 7:09 pm » in Farmall Cub - 9
- 310
-
by darkmuncan81
Sun Nov 06, 2022 10:35 pm
-
Who is online
Users browsing this forum: Google [Bot], Tom Clark and 5 guests