This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall M Hydraulics
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Farmall M Hydraulics
I am ready to put 30 wt HD in our M hydrauilic res. How much does it hold, owners manual has nothing on hydraulics.
Thanks Phil
Thanks Phil
"Work Hard ,Play Often,Care Always"
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Farmall M Hydraulics
Phil - If memory serves - it's 6 quarts.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 173
- Joined: Fri Nov 16, 2007 4:14 pm
- Zip Code: 51646
- Location: New Market, Iowa
Re: Farmall M Hydraulics
Yes, 6 quarts.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall M Hydraulics
Phil, the original manuals stated 30wt non detergent. I once asked Dad about that, and he said that the cups on the older hydraulic cylinders would deteriorate and deform with detergent oil. He stated he learned the hard way. If the cups in your cylinders have been replaced at sometime in the last 25 or so years, I would think H would be ok, but if not, I would stick with non detergent.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 5882
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
Re: Farmall M Hydraulics
Wow must be getting close!!! Kevin
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: Farmall M Hydraulics
I replaced the o-rings etc,I did not see any rubber cups in there, I was through it completely.
I used detergent oil , hope it will be OK
You thoughts
I can drain it and use it for the break in if not.
Phil
Ye Kevin i am getting close. waiting on some parts to finish the engine then off to the booth. Then put engine in and start up. The fluids replacement is going to be pricey, 13 gal 90 wt ,8 qts. / oil filter, 6 gal acoolant.
I used detergent oil , hope it will be OK
You thoughts
I can drain it and use it for the break in if not.
Phil
Ye Kevin i am getting close. waiting on some parts to finish the engine then off to the booth. Then put engine in and start up. The fluids replacement is going to be pricey, 13 gal 90 wt ,8 qts. / oil filter, 6 gal acoolant.
"Work Hard ,Play Often,Care Always"
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall M Hydraulics
Phil, the cylinders I was referring to were on the real old stuff, such as cultivators the model 30 loader, etc. they used a large rubber piece on the ram not really cupped shaped, but the detergent oil would deform them. If you have newer cylinders that used only o'rings, it is probably ok. Any that have had the piston cups replaced in the last 25 or so years, maybe longer should be ok, and any that are in use have most likely been replaced in that amount of time. The main problem if it occurs, is after time the oil will bypass inside the cylinder. If you should get a chance to talk to George Willer, he can probably provide more info it.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: Farmall M Hydraulics
John:
If I hear right it is any cylinder that may be attached to the tractor not the tractor pump itself
I do not plan to use the hydraulics to much , but if I do it will be for a three point hook up , someday.
Thanks
Phil
If I hear right it is any cylinder that may be attached to the tractor not the tractor pump itself
I do not plan to use the hydraulics to much , but if I do it will be for a three point hook up , someday.
Thanks
Phil
"Work Hard ,Play Often,Care Always"
-
- 10+ Years
- Posts: 173
- Joined: Fri Nov 16, 2007 4:14 pm
- Zip Code: 51646
- Location: New Market, Iowa
Re: Farmall M Hydraulics
The real beauty of those original belly pumps is that, in a pinch, you could pour in just about any kind of oil that you have handy and it will still function just fine. Using what is recommended is always a good idea, but that hydraulic system will function just fine with any of the modern "hydraulic" oils.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall M Hydraulics
They were pretty forgiving alright. Ours ran the end of the valve lever spring through the pump, and chewed the pump up pretty good. Still ok in cold weather, and in hot weather we just used heavier oil. Try that with a modern system.RustyFarmall wrote:The real beauty of those original belly pumps is that, in a pinch, you could pour in just about any kind of oil that you have handy and it will still function just fine. Using what is recommended is always a good idea, but that hydraulic system will function just fine with any of the modern "hydraulic" oils.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Team Cub
- Posts: 17309
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Farmall M Hydraulics
RustyFarmall wrote:The real beauty of those original belly pumps is that, in a pinch, you could pour in just about any kind of oil that you have handy and it will still function just fine. Using what is recommended is always a good idea, but that hydraulic system will function just fine with any of the modern "hydraulic" oils.
This comment reminds me of a tip. If you are using the remote hydraulics on more than one tractor to operate a single implement, you have a potential of mixing/contaminating fluid between the tractors. The "fix" is to use the same fluid in all tractors, whatever the most stringent requirement is. For most situations, it means using a Hy-Tran equivalent. If you are not going to move equipment between the M and anything else, just go with the basic recommendations already discussed.
-
- 10+ Years
- Posts: 1631
- Joined: Fri Dec 22, 2006 6:28 am
- Zip Code: 37743
- Circle of Safety: Y
- Location: Tennessee East
Re: Farmall M Hydraulics
I'm still trying to figure out how to put the piston valve lever together. Has anyone ever done this?
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: Farmall M Hydraulics
yes I have I will pm you with my phone number
Phil
Phil
"Work Hard ,Play Often,Care Always"
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 1 guest