All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
14 posts • Page 1 of 1
This may be off topic and if it is I will move it. This weekend I bought an IH Corn Sheller at a swap meet in Arizona. I am wondering where I can go to get some information about it.
There are several different models that IH made, bench mount one at at time, floor standing one cob at a time and floor standing 2 at a time. I've seen some old ones that were made of wood, would take two cobs at a time and meant to be driven off a belt pulley. I have one that looks like this:
(photo from Wisconson Hist Society #11639)
I have been unable to get any information about PN's or years made.
The one I purchased looks to be the exact model I purchased. I rellay like the picture you posted. If I can figure out how to post a picture I will post it
Thanks for the info
Here is a photo of Bob's new toy!! Bob, you would'nt happen to be in Prescott Valley would you?? I've been there before and they had an awesome swap meet/flea market that was full of antiques and collectables.
I see yours is missing the fanbelt. I have been told that the "O" ring gasket from a 5 gallon bucket is a good replacement. Remember, put it on in a figure "8" so the fan runs the right way.
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
Thanks for posting the picture. I am on vacation in a small town called Hope. It is about 100 miles from Prescott Valley. Now I will have to find the swap meet you are talking about. I bought the sheller in Lake Havasu. I hope this post generates some information about the the sheller.
There is a belt on the fan but it is hard to see. Thanks for the idea for a replacemet. The belt on it now is from a vacuum sweeper.
Thanks to you guys for the input
I have one exactly like that too, cept' mine is missing the hand crank assembly and I have to turn it by hand with the flywheel!----I have been looking for model #'s and so far came up dry!---there were millions of these around and in their day were great! I use mine daily to shell chicken corn! thanks; sonny
Yep! Have one just like it! Works well to hull walnuts except the hull w/jam up in the bottom (don't ask me how I know! lol) Can also tighten the feed down and shell popcorn w/it. All you need is a motor or a youngster on the handle! DustyB
Grandpa's '41 B
'51 Super C
'55 Case SC
Fairbanks-Morse 3KW Generator
Dad's DB garden tractor
'31 "A Coupe
'51 Ford PU
'55 Dodge PU
God looks out for those of us who don't know how to look out for ourselves!
14 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests