My SA that I'm rebuilding has a Carter UT carburetor that is corroded pretty bad by one of the jets in the lower zinc casting and I don't think it's repairable. If I buy a Zenith replacement, will it drop in or is there other problems like the linkage rods?
Gerry
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
SA carburetor
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 321
- Joined: Wed Jan 21, 2009 2:17 pm
- Zip Code: 78736
- Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350 - Location: Austin, TX
-
- 10+ Years
- Posts: 219
- Joined: Thu Nov 12, 2009 1:36 pm
- Zip Code: 61272
- Tractors Owned: Tractors
1940s Allis Chalmers B
1966 140
Cars
1964 Cadillac
1955 R190 - Location: New Boston IL
Re: SA carburetor
I had a carter on mine and a new Zenith dropped right in. Just be ready to adjust everything when you put the new carb on. Not really a hard process, but will be necessary due to the new carb.
Jason
"Beauty through function and simplification."
"Raymond Lowey"
"Beauty through function and simplification."
"Raymond Lowey"
-
- 10+ Years
- Posts: 321
- Joined: Wed Jan 21, 2009 2:17 pm
- Zip Code: 78736
- Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350 - Location: Austin, TX
Re: SA carburetor
Jason, do you remember which Zenith model # you used?
Gerry
Gerry
-
- 10+ Years
- Posts: 219
- Joined: Thu Nov 12, 2009 1:36 pm
- Zip Code: 61272
- Tractors Owned: Tractors
1940s Allis Chalmers B
1966 140
Cars
1964 Cadillac
1955 R190 - Location: New Boston IL
Re: SA carburetor
http://www.thecarburetorstore.com/servlet/Detail?no=24
Above is what I used exactly. This is a brand new carb made by Zenith. They shipped fast since they were right in Memphis. Since I am in TN it only took about a day or two, and because they were busy was the only delay. If you want to save money you could also find another carb reconditioned, but I don't know of any good sites to get them from.
When I took my carter apart a chunk came out the back. It was no wonder the body gasket was not sealing correctly.
Above is what I used exactly. This is a brand new carb made by Zenith. They shipped fast since they were right in Memphis. Since I am in TN it only took about a day or two, and because they were busy was the only delay. If you want to save money you could also find another carb reconditioned, but I don't know of any good sites to get them from.
When I took my carter apart a chunk came out the back. It was no wonder the body gasket was not sealing correctly.
Jason
"Beauty through function and simplification."
"Raymond Lowey"
"Beauty through function and simplification."
"Raymond Lowey"
-
- 10+ Years
- Posts: 321
- Joined: Wed Jan 21, 2009 2:17 pm
- Zip Code: 78736
- Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350 - Location: Austin, TX
Re: SA carburetor
Jason,
I ordered the one you recommended.
thanks, Gerry
I ordered the one you recommended.
thanks, Gerry
-
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Re: SA carburetor
Cool Jason
Ya just saved me some money. I was getting ready to get one off of epay for $205 for my 130.
Billy
Ya just saved me some money. I was getting ready to get one off of epay for $205 for my 130.
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
- 10+ Years
- Posts: 219
- Joined: Thu Nov 12, 2009 1:36 pm
- Zip Code: 61272
- Tractors Owned: Tractors
1940s Allis Chalmers B
1966 140
Cars
1964 Cadillac
1955 R190 - Location: New Boston IL
Re: SA carburetor
Cowboy wrote:Cool Jason
Ya just saved me some money. I was getting ready to get one off of epay for $205 for my 130.
Billy
Yea I don't use eBay unless I have to. People just think things are worth a fortune.
Glad I could help. Like I said my experience with them was good. The carb came just fine, and is working very well. They say these out perform the originals, but I am just happy to have one without a chunk missing.
Jason
Jason
"Beauty through function and simplification."
"Raymond Lowey"
"Beauty through function and simplification."
"Raymond Lowey"
-
- 10+ Years
- Posts: 321
- Joined: Wed Jan 21, 2009 2:17 pm
- Zip Code: 78736
- Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350 - Location: Austin, TX
Re: SA carburetor
I got my carburetor today, fast delivery, installed and tweaked. Works perfectly and fits perfectly. Thanks for the tip, saved quite a few dollars compared to the "big box" dealers.
Gerry
Gerry
-
- 10+ Years
- Posts: 219
- Joined: Thu Nov 12, 2009 1:36 pm
- Zip Code: 61272
- Tractors Owned: Tractors
1940s Allis Chalmers B
1966 140
Cars
1964 Cadillac
1955 R190 - Location: New Boston IL
Re: SA carburetor
ibrake4rust wrote:I got my carburetor today, fast delivery, installed and tweaked. Works perfectly and fits perfectly. Thanks for the tip, saved quite a few dollars compared to the "big box" dealers.
Gerry
Hey Glad I could help someone!
Jason
"Beauty through function and simplification."
"Raymond Lowey"
"Beauty through function and simplification."
"Raymond Lowey"
-
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: SA carburetor
josys36 wrote:http://www.thecarburetorstore.com/servlet/Detail?no=24
Above is what I used exactly. This is a brand new carb made by Zenith. They shipped fast since they were right in Memphis. Since I am in TN it only took about a day or two, and because they were busy was the only delay. If you want to save money you could also find another carb reconditioned, but I don't know of any good sites to get them from.
When I took my carter apart a chunk came out the back. It was no wonder the body gasket was not sealing correctly.
My '39 A project has a Carter on it. I have heard parts are getting hard to get for them. I think I might check these folks out and put a Zenith on it...
Thanks for the info!
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
- Similar Topics
- Replies
- Views
- Last post
-
-
1954 Super A1 carburetor
by bt73000 » Sat Oct 02, 2021 9:04 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 7
- 405
-
by ShawnAgne
Thu Oct 07, 2021 7:24 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: PoconoCub and 2 guests