This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub 6 tool bar info
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 769
- Joined: Sun Jan 20, 2008 5:52 pm
- Zip Code: 44491
- Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
- Circle of Safety: Y
- Location: West Farmington, OH
Cub 6 tool bar info
Bought Dale's toolbar, but will need to make guide rails (part #4&5 on pg. 13 of manual in manual forum) Sorry I'm not smart enough to copy to this post. Does anyone have access to these parts to give me the measurements so I can make a set. Thanks. John
-
- 10+ Years
- Posts: 3562
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: Cub 6 tool bar info
tinnerjohn wrote:Bought Dale's toolbar, but will need to make guide rails (part #4&5 on pg. 13 of manual in manual forum) Sorry I'm not smart enough to copy to this post. Does anyone have access to these parts to give me the measurements so I can make a set. Thanks. John
Here ya go:
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
-
- 10+ Years
- Posts: 389
- Joined: Thu Jul 02, 2009 1:06 pm
- Zip Code: 70816
- Circle of Safety: Y
- Location: Baton Rouge Louisiana
Re: Cub 6 tool bar info
I'll measure my set at home when I get there after work. Mine aren't original....But they were coppied from an original set. I'll shot a pic or 2 also.
Hank
Hank
"Tiger" 1974 International Cub
"Littl' Smokey" 104 Cub Cadet
"Red Light" 1952 Farmall Cub with 151 disc plow
"Lucky" 1970 International 140
"Littl' Smokey" 104 Cub Cadet
"Red Light" 1952 Farmall Cub with 151 disc plow
"Lucky" 1970 International 140
-
- 10+ Years
- Posts: 3034
- Joined: Wed May 31, 2006 12:09 pm
- Zip Code: 74070
- Circle of Safety: Y
- Location: OK, Skiatook
Re: Cub 6 tool bar info
Gator809 wrote:I'll measure my set at home when I get there after work. Mine aren't original....But they were coppied from an original set. I'll shot a pic or 2 also.
Hank
Thanks Hank, I had some dimensions from Dale, but evidently I deleted 'em
Bill
-
- 10+ Years
- Posts: 769
- Joined: Sun Jan 20, 2008 5:52 pm
- Zip Code: 44491
- Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
- Circle of Safety: Y
- Location: West Farmington, OH
Re: Cub 6 tool bar info
Thanks fellows. I don't have them here yet, but I want to be ready to mount them. You know how a kid with a new toy is. John
-
- 10+ Years
- Posts: 260
- Joined: Sun Nov 04, 2007 9:07 pm
- Zip Code: 44234
- Tractors Owned: (2) 1959 Cubs (1) 1951 Cub
- Circle of Safety: Y
- Location: Ohio, Hiram
Re: Cub 6 tool bar info
Tinnerjohn, did you make it to the "world's largest tractor parade" this weekend? Check out the for sale section, I have some cultivator pieces parts for sale, maybe what you need?
-
- 10+ Years
- Posts: 769
- Joined: Sun Jan 20, 2008 5:52 pm
- Zip Code: 44491
- Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
- Circle of Safety: Y
- Location: West Farmington, OH
Re: Cub 6 tool bar info
Moved this back to top. Still need the dimensions if someone can help. I can probably come close by trial and error, but we all know how that can work sometimes. Thanks again. John
-
- Cub Pro
- Posts: 1741
- Joined: Tue Jul 18, 2006 9:55 pm
- Zip Code: 37087
- Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower
1974 Cub S/N 244814
w/59 Woods Mower
Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI - Circle of Safety: Y
- Location: TN, Lebanon
Re: Cub 6 tool bar info
Tinnerjohn, I think that your toobar is on my trailer as we speak. It is heavy enough to provide ballast behind cub. We plan to be at Bigdog's tomorrow afternoon.
"Courage is being scared to death-but saddling up anyway".......John Wayne
-
- Team Cub
- Posts: 9534
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: Cub 6 tool bar info
BIGHOSS wrote:Tinnerjohn, I think that your toobar is on my trailer as we speak. It is heavy enough to provide ballast behind cub. We plan to be at Bigdog's tomorrow afternoon.
Great. I'll see you this afternoon (I'll be near the pig roasting spit) so we can make the switch.
Bill
-
- 10+ Years
- Posts: 769
- Joined: Sun Jan 20, 2008 5:52 pm
- Zip Code: 44491
- Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
- Circle of Safety: Y
- Location: West Farmington, OH
Re: Cub 6 tool bar info
Thankyou Big Hoss and Bill. Have a safe trip there and back and a great time at the Tug. Wish I could make it. Maybe next year. John
-
- 10+ Years
- Posts: 480
- Joined: Wed Jul 28, 2010 12:53 pm
- Zip Code: 18822
- eBay ID: ranger_jer
- Circle of Safety: Y
- Location: PA, Hallstead (Susquehanna County)
Re: Cub 6 tool bar info
Does anyone have dimentions for this thing ?
Is the bar 1.5 x 1.5 ? How long is it?
How long are the attaching arms, how far along til they bend and wahts the angle ?
I can't find one of these and need to make one but cant find one to look at in person and measure myself, any and all help is appreciated !
Is the bar 1.5 x 1.5 ? How long is it?
How long are the attaching arms, how far along til they bend and wahts the angle ?
I can't find one of these and need to make one but cant find one to look at in person and measure myself, any and all help is appreciated !
22 sickle bar mower x2
23A tandem disc harrow
144 cultivator (#53 & #97 spring tooth)
154 leveling and grader blade
189 moldboard plow 2-way
193 moldboard plow x2
spring tooth harrows
David Bradley planter (modded for Cub)
23A tandem disc harrow
144 cultivator (#53 & #97 spring tooth)
154 leveling and grader blade
189 moldboard plow 2-way
193 moldboard plow x2
spring tooth harrows
David Bradley planter (modded for Cub)
-
- 10+ Years
- Posts: 769
- Joined: Sun Jan 20, 2008 5:52 pm
- Zip Code: 44491
- Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
- Circle of Safety: Y
- Location: West Farmington, OH
Re: Cub 6 tool bar info
Heres some measurements. The bar is 1.75 sq. X 56". The arms are 1" X 2 3/8 " X 38 1/2" with a 25 degree bend 20" from the tractor end (where they pin to part 6). Hope this helps. If you want, PM your address and I'll mail some pics and measurements. Sorry, but I haven't been able to master that stuff on the computer. John
-
- 10+ Years
- Posts: 70
- Joined: Sat Mar 06, 2010 6:55 am
- Zip Code: 20132
- Tractors Owned: 1972 IH Cub
1976 IH Cub
1979 IH 884 - Circle of Safety: Y
- Location: Northern Virginia
Re: Cub 6 tool bar info
Thanks for posting those dimensions a while ago, it's really useful.
I'm curious about the bracket too (part 6) -- can someone tell me how long it is end-to-end, and how thick/wide the piece of steel it's made from is?
-David
I'm curious about the bracket too (part 6) -- can someone tell me how long it is end-to-end, and how thick/wide the piece of steel it's made from is?
-David
Vegetable farming with a Cub, http://www.secondspringcsa.com
-
- 10+ Years
- Posts: 769
- Joined: Sun Jan 20, 2008 5:52 pm
- Zip Code: 44491
- Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
- Circle of Safety: Y
- Location: West Farmington, OH
Re: Cub 6 tool bar info
David, I just checked one of mine. I bracket is 1/2"X3" Flat stock, 12 1/2" to inside of bend on long side, 4 1/2" on short side. Don't forget the offset since the toolbar arms are narrower than the finals, unless your custom building that. If it would help, I could send you a tracing of mine if you PM your address. Hope this helps and pause at 11:11 AM to remember our veterans. John
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 180
-
by Cooter
Wed May 08, 2024 8:52 pm
-
- 15
- 745
-
by Don McCombs
Wed Oct 27, 2021 3:19 pm
-
- 4
- 355
-
by Rmpelley
Tue May 17, 2022 6:28 am
-
- 6
- 297
-
by Stanton
Tue Jul 20, 2021 6:20 am
-
-
Recommendations: Hydraulic Measuring Tool Attachment(s)
by lakesurfer » Tue Apr 02, 2024 2:24 pm » in Farmall Cub - 27
- 646
-
by Glen
Tue Apr 16, 2024 9:35 pm
-
Who is online
Users browsing this forum: No registered users and 2 guests