This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
J4 Magneto
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 4
- Joined: Fri Sep 03, 2010 2:55 pm
- Zip Code: 37918
J4 Magneto
Hi folks, new on here and don't really know how to do this but I will give it a good try.
I recently purchased a 1950 cub S/N: 112047. It is not in the best of shape paint wise but I don't think that the mechanics has any serious problems. Now for the question. I think I have a J4 magneto. At least the s/n starts with J4. I am unable to get any spark. I have torn it down, but not all the way. I refiled the points & cleaned it. Not real sure how to check the coil. The primary of the coil reads around 2-3 ohms. The secondary is a little over 10 kohms. I am thinking that it is good. Now I am looking at the impulse drive. Isn't it suppose to sort of compress the spring and then trip. Currently the only resistance I feel is from the power of the magnet. I was going to take the impulse drive off but it requires tool number ..... Can anyone advise me on this and what is the thread size of the puller so that I can make one. Thanks for any help that I can get.
I recently purchased a 1950 cub S/N: 112047. It is not in the best of shape paint wise but I don't think that the mechanics has any serious problems. Now for the question. I think I have a J4 magneto. At least the s/n starts with J4. I am unable to get any spark. I have torn it down, but not all the way. I refiled the points & cleaned it. Not real sure how to check the coil. The primary of the coil reads around 2-3 ohms. The secondary is a little over 10 kohms. I am thinking that it is good. Now I am looking at the impulse drive. Isn't it suppose to sort of compress the spring and then trip. Currently the only resistance I feel is from the power of the magnet. I was going to take the impulse drive off but it requires tool number ..... Can anyone advise me on this and what is the thread size of the puller so that I can make one. Thanks for any help that I can get.
-
- 10+ Years
- Posts: 755
- Joined: Sun Jan 02, 2005 4:28 pm
- Zip Code: 63031
- Location: St. Louis Mo.
WELCOME
Go here http://www.cleancomputes.com/Cub/Blue%2 ... index.html and look under magnetos --- not all j4 but the info is great.
-
- 10+ Years
- Posts: 4
- Joined: Fri Sep 03, 2010 2:55 pm
- Zip Code: 37918
Re: J4 Magneto
Thanks Charlses. I did go there but the pictures do leave a little to be desired. It is a great place and I am glad to get what info I did but I still need a little more info.
-
- Team Cub Mentor
- Posts: 4129
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 13830
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
Re: J4 Magneto
If when you turn it over by hand there is no resistance I would say that the impulse is defective. Make sure when you do turn it over the mag is in the proper upright position. With no impulse the mag is not turning fast enough to generate a spark. Another thing you could try is turning it over with a drill. That would spin it fast enough so that it would fire without the impulse.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: J4 Magneto
The impulse puller is available from Earl here on the forum. Send a Private Message to him and he can fix you up. His user name is Earl.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 4
- Joined: Fri Sep 03, 2010 2:55 pm
- Zip Code: 37918
Re: J4 Magneto
Thanks guys you have been a big help. I will reassemble it and try the drill motor and I also will try to get in touch with Earl on the puller.
-
- 10+ Years
Re: J4 Magneto
Do you get no resistance which ever way you turn it by hand Looking from the drive end if you turn it clock wise you should run up against the spring.
-
- 10+ Years
- Posts: 4
- Joined: Fri Sep 03, 2010 2:55 pm
- Zip Code: 37918
Re: J4 Magneto
Donny M,
Thanks for the reply.
It hits a stop when I turn it clockwise. When I turn it counter clockwise I feel only the resistance of the magnet. Cecil suggested that I run it with a drill. Well Cecil is correct. When I turn it faster it really puts out a good blue spark and makes a very good crack. I am just glad I wasn't holding the wire. I have send a private note to Earl for a tool or info on a tool to pull the impulse drive to check and see if there is anything that might be worn or broken. The spring and everything I can see is ok. One other thing I did do is cook the coil in the oven. I read on one forum, maybe this one, putting the coil in the oven and heat it to 250 and then let it cool off in the oven. I heated it to 200 and let it cool.
Thanks for the reply.
It hits a stop when I turn it clockwise. When I turn it counter clockwise I feel only the resistance of the magnet. Cecil suggested that I run it with a drill. Well Cecil is correct. When I turn it faster it really puts out a good blue spark and makes a very good crack. I am just glad I wasn't holding the wire. I have send a private note to Earl for a tool or info on a tool to pull the impulse drive to check and see if there is anything that might be worn or broken. The spring and everything I can see is ok. One other thing I did do is cook the coil in the oven. I read on one forum, maybe this one, putting the coil in the oven and heat it to 250 and then let it cool off in the oven. I heated it to 200 and let it cool.
-
- 10+ Years
Re: J4 Magneto
You're turning it the wrong way. It needs to turn clockwise looking at the back of it. The resistance you're feeling is the impulse. If your hands are strong enough, keep turning it clockwise and it will trip. Do this only with some kind of spark gap to ground or you will burn the coil. Cecil's info is flawed.
Last edited by Donny M on Fri Sep 03, 2010 8:29 pm, edited 1 time in total.
-
- 10+ Years
Re: J4 Magneto
Just to clarify, the mag will generate a spark whatever way you turn it. The impulse will only work turning it clockwise looking at the drive.
-
- 10+ Years
- Posts: 228
- Joined: Sat May 03, 2008 3:26 pm
Re: J4 Magneto
HI PINEKNOT42
TAKE THE NUT ( IN CENTER OF IMPULSE COUPLING ) LOUSE-----BACK THE
NUT OFF ONE TURN-----THEN HOLD THE MAG. BY THE IMPULSE COUPLING
SMACK THE NUT WITH 12 OZ. BRASS HAMMER--------BINGO-----
GOOD LUCK
LOMBARD-----S.C.-----
TAKE THE NUT ( IN CENTER OF IMPULSE COUPLING ) LOUSE-----BACK THE
NUT OFF ONE TURN-----THEN HOLD THE MAG. BY THE IMPULSE COUPLING
SMACK THE NUT WITH 12 OZ. BRASS HAMMER--------BINGO-----
GOOD LUCK
LOMBARD-----S.C.-----
-
- 10+ Years
- Posts: 426
- Joined: Fri May 08, 2009 7:04 pm
- Zip Code: 62082
- Tractors Owned: two 47 two 48 53 and a 72 another 53
- Location: Roodhouse il
Re: J4 Magneto
sounds to me like its ok time the engine and put it on bet it will work
You meet the nicest people on a cub
-
- Cub Pro
- Posts: 2779
- Joined: Sun Jul 01, 2007 10:07 pm
- Zip Code: 29518
- Circle of Safety: Y
- Location: SC, Cades 29518
Re: J4 Magneto
The impulse puller is a 9/16' - 28 thread, IF I REMEMBER CORRECTLY.....
As someone who broke one doing it another way, I don't recommend ANY other way. However, yours does not appear to need disassembly. Don't go looking for trouble. If you are getting a hot blue spark, the problem is not in your mag. Put it back on the tractor, in time, and look elsewhere.
edit - corrected my thread size above to read 16, not '6
As someone who broke one doing it another way, I don't recommend ANY other way. However, yours does not appear to need disassembly. Don't go looking for trouble. If you are getting a hot blue spark, the problem is not in your mag. Put it back on the tractor, in time, and look elsewhere.
edit - corrected my thread size above to read 16, not '6
Last edited by Rick Spivey on Mon Sep 06, 2010 5:37 pm, edited 1 time in total.
Rick Spivey
'52 Cub ("Great Personality") 148xxx
'48 Cub with FH ("Gunny Cub") 38xxx
'57 Lambretta (a slow work in progress)
'74 Triumph TR6 (Mama's toy)
'52 Cub ("Great Personality") 148xxx
'48 Cub with FH ("Gunny Cub") 38xxx
'57 Lambretta (a slow work in progress)
'74 Triumph TR6 (Mama's toy)
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: J4 Magneto
I would turn it clockwise even if you have to put it in a vice, and make sure it is tripping. tape a spark plug to the mag and hook the coil wire to it. You can turn it by hand if you have good strength in your hands. If not put it in a vice and us a wrench on it.
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Cub Pro
- Posts: 2673
- Joined: Sun Feb 02, 2003 7:01 pm
- Zip Code: 41005
- Tractors Owned: Near 200 cubs through the years
- Circle of Safety: Y
- Location: Ky Florence Y'ALL
Re: J4 Magneto
AS boss said
turn it clockwise even if you have to put it in a vise.
there could be something loose inside that will let it turn ccw and lock up clockwise.
by putting it on the tractor you could do some serious damage to the timing and idler gears
turn it clockwise even if you have to put it in a vise.
there could be something loose inside that will let it turn ccw and lock up clockwise.
by putting it on the tractor you could do some serious damage to the timing and idler gears
Shoot low Sherriff they are Riding Shadows
4 Wheels move the body.....
2 Wheels move the Soul .....
Ralph in ky.
4 Wheels move the body.....
2 Wheels move the Soul .....
Ralph in ky.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8
- 294
-
by Rick Spivey
Sun Mar 24, 2024 4:09 pm
-
- 2
- 130
-
by Jim Becker
Mon Aug 08, 2022 9:18 am
-
- 7
- 264
-
by Glen
Fri Aug 26, 2022 5:45 pm
-
- 3
- 240
-
by Steve Butram
Thu Nov 09, 2023 6:59 pm
-
- 9
- 427
-
by Glen
Sun Feb 27, 2022 6:07 pm
Who is online
Users browsing this forum: Cub driver, Majestic-12 [Bot] and 3 guests