Today we decided to get our 49' M started after about 3 years. after draining gas, cleaning sediment bowl, putting in new gas, and changing plugs we hooked chain on it and pull started it. it started right up, but seem to be running like a plug or wire is off. but bigger than that, we have no throttle. It moves, but no control of the idle or rpm's.
I am guessing this is a carb. or govenor problem? any help is appreciated.
Thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall M carb. / govenor problem
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 250
- Joined: Sun Aug 22, 2010 8:10 pm
- Zip Code: 46112
- Tractors Owned: 47' Cub
49' H
55' 300U
47' Oliver 70 Row Crop
Mott mower
cultivators
#8 2-14 Little Genius Plow - Location: Brownsburg, IN
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Farmall M carb. / govenor problem
I suspect your governor is gummed up or linkage is sticking.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 4129
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: Farmall M carb. / govenor problem
Linkage is stuck inside the tube!---they are notorious for doing that from sitting so long! thanks; sonny
-
- 10+ Years
- Posts: 250
- Joined: Sun Aug 22, 2010 8:10 pm
- Zip Code: 46112
- Tractors Owned: 47' Cub
49' H
55' 300U
47' Oliver 70 Row Crop
Mott mower
cultivators
#8 2-14 Little Genius Plow - Location: Brownsburg, IN
Re: Farmall M carb. / govenor problem
Thanks to you both for your replies. I plan on getting back on this in the next day or so. I also failed to mention it almost sounds like it is missing when it runs. Almost like those old "other" brand of tractors. Maybe a stickly valve? Should I pour PB or ATF in the plugs? and let sit for a day or try to start back up?
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Farmall M carb. / govenor problem
Pull the plugs and clean them. If it is still missing when you start it up determine which cylinder it is and check the spark quality and run a compression test. some SeaFoam in the gas and oil won't hurt a thing.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 250
- Joined: Sun Aug 22, 2010 8:10 pm
- Zip Code: 46112
- Tractors Owned: 47' Cub
49' H
55' 300U
47' Oliver 70 Row Crop
Mott mower
cultivators
#8 2-14 Little Genius Plow - Location: Brownsburg, IN
Re: Farmall M carb. / govenor problem
Bigdog,
already put new plugs in - still the same. Is it OK to put the seafoam in and still run it? Should we not run until we resolve or is there a chance it will free on its own?
already put new plugs in - still the same. Is it OK to put the seafoam in and still run it? Should we not run until we resolve or is there a chance it will free on its own?
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Farmall M carb. / govenor problem
It won't hurt to put the SeaFoam in and run it. Watch the oil and when it turns black change it. SeaFoam can be used in the gas as a regular additive in smaller quantities. I usually add a little Marvel Mystery Oil to each tankful of gas.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 173
- Joined: Fri Nov 16, 2007 4:14 pm
- Zip Code: 51646
- Location: New Market, Iowa
Re: Farmall M carb. / govenor problem
You've got a stuck valve, and quite possibly the rocker for that valve has seperated from the push rod and it's even possible that the push rod is now bent. All of that can be fixed and it won't cost anything, but you need to remove the valve cover and have a look.
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 0 guests