This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Should I buy this, or not?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 4
- Joined: Sat Oct 09, 2010 9:36 pm
- Zip Code: 15425
Should I buy this, or not?
Im new to this forum, but not new to a forum. My friend has a 195x Farmall 200 for sale. It comes with a 2 blade plow, and a set of discs. The tractor runs, its just a little rusty and could use a paint job. There asking price ie 2000$.. is it worth it?
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Should I buy this, or not?
It's difficult to answer a question like this without seeing the tractor and hearing it run, but it's likely not worth that much.
-
- 10+ Years
- Posts: 4
- Joined: Sat Oct 09, 2010 9:36 pm
- Zip Code: 15425
Re: Should I buy this, or not?
Don McCombs wrote:It's difficult to answer a question like this without seeing the tractor and hearing it run, but it's likely not worth that much.
Well for as the running part, I heard it run, runs like a champ.. No problems.. I can help with the picture thing though.
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Should I buy this, or not?
Having seen the photo, it still seems high to me. Here is a list of things to look for when buying a Cub. They should be equally appropriate for this tractor.
What things should I look at when inspecting a Cub for possible purchase?
Other than the usual things that you would check on any tractor or automobile, smoke from the engine, either from the exhaust or the breather, oil pressure, loose steering, tire condition etc.), these are some of the areas where you are most likely to find a need for repairs.
Check for freeze and stress cracks:
Engine block: high on the side, ahead of the oil filter, and at the front where block bolts to front casting, check both sides.
Head: on the top surface
Front casting: across the front, at the lower edge of the grille, or the horizontal surface directly in front of the radiator, also check for cracks just in front of where the casting bolts to the block. You should also inspect the area around the bolt holes, where the engine and casting bolt together, as the ears sometimes are cracked.
Check that the brakes work, that the brake drums have not come loose on the axle.
Check the transmission to see if it goes into each gear smoothly, and stays in gear when the tractor is moving. This is especially true of first and reverse.
Check that the PTO will engage, disengage and hold.
Check the final drive housings for cracks, areas prone to cracks are the flanges, where the housings bolt around the brakes, and attach to the transmission case, or the flange at the axle housing extension. I have also seen final drive housings with stress cracks at the top of the casting.
Try to make sure that all of the hardware required to mount any included implements is in fact included.
What things should I look at when inspecting a Cub for possible purchase?
Other than the usual things that you would check on any tractor or automobile, smoke from the engine, either from the exhaust or the breather, oil pressure, loose steering, tire condition etc.), these are some of the areas where you are most likely to find a need for repairs.
Check for freeze and stress cracks:
Engine block: high on the side, ahead of the oil filter, and at the front where block bolts to front casting, check both sides.
Head: on the top surface
Front casting: across the front, at the lower edge of the grille, or the horizontal surface directly in front of the radiator, also check for cracks just in front of where the casting bolts to the block. You should also inspect the area around the bolt holes, where the engine and casting bolt together, as the ears sometimes are cracked.
Check that the brakes work, that the brake drums have not come loose on the axle.
Check the transmission to see if it goes into each gear smoothly, and stays in gear when the tractor is moving. This is especially true of first and reverse.
Check that the PTO will engage, disengage and hold.
Check the final drive housings for cracks, areas prone to cracks are the flanges, where the housings bolt around the brakes, and attach to the transmission case, or the flange at the axle housing extension. I have also seen final drive housings with stress cracks at the top of the casting.
Try to make sure that all of the hardware required to mount any included implements is in fact included.
-
- 10+ Years
- Posts: 5880
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
Re: Should I buy this, or not?
To high I think!!!! keep looking.Kevin
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
- Cub Pro
- Posts: 4259
- Joined: Mon Dec 17, 2007 6:25 pm
- Zip Code: 70737
- Circle of Safety: Y
- Location: LA, Gonzales
Re: Should I buy this, or not?
Around these parts that may be a bit high, but is it exactly what you are looking for? If you look around and are willing to travel , you can most likely find a better deal cash wise Whatever you decide to do , consider the purchase price plus the cost to put it in the condition you would like and see if it suites your needs. The lowest purchase price does not always mean the best value in the long run. Good luck.
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Should I buy this, or not?
My questions.
1. What do you want a tractor for - to do?
2. Will the 200 do what you want?
3. Would a bigger tractor do the same tasks, easier, faster?
4. What are tractors equiped with hydraulics, pto, 3 point, in the size you need, going for in your area?
1. What do you want a tractor for - to do?
2. Will the 200 do what you want?
3. Would a bigger tractor do the same tasks, easier, faster?
4. What are tractors equiped with hydraulics, pto, 3 point, in the size you need, going for in your area?
I have an excuse. CRS.
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 1 guest