![Image](http://photos.cubfest.com/albums/userpics/11007/trailer_001.jpg)
Current project. Neighbor gave me the trailer. Must have been someone's school project. Springs had been mounted solid and were broken. Axle was way to big for the trailer - home made utilizing two truck steering knuckes and spindles. Some of the original welds will need to be cleaned up and rewelded
![Image](http://photos.cubfest.com/albums/userpics/11007/trailer_002.jpg)
Purchased 2000 lb axle set, just over $200- shipping included. Beefing up, widening, the trailers side rails to hold the spring shackles. Out of pocket cost will be some where between $225 and $250-.
![Image](http://photos.cubfest.com/albums/userpics/11007/trailer_003.jpg)
Need a small highway capable, easy loading, trailer for hauling loads smaller than the 18 foot tandum axle trailer. Can also tow the trailer with the Cub for farm chores. Trailer is about 4 1/2 feet wide and 7 feet long. Original trailer frame has been shortened for some reason.
Edit: Clean up grammer.