I know there are numerous posts about this. I have looked ant any posts and diagrams, but cannot find one that illustrates exactly like mine. I have a 49' H, with distributor, 4-post light switch and voltage reg.
here is what I have:
1. a wire from the F term. on the VR to the F on gen.
2. BAT on VR to Discharge side of the gauge.
3. a wire from Discharge of gauge to the fuse lag on the light switch.
I know I have the wire for the lights correct, or at least I think I do.
Any help is greatly appreciated!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall H Wiring
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 250
- Joined: Sun Aug 22, 2010 8:10 pm
- Zip Code: 46112
- Tractors Owned: 47' Cub
49' H
55' 300U
47' Oliver 70 Row Crop
Mott mower
cultivators
#8 2-14 Little Genius Plow - Location: Brownsburg, IN
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Farmall H Wiring
It would help if we knew what was not working?
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 250
- Joined: Sun Aug 22, 2010 8:10 pm
- Zip Code: 46112
- Tractors Owned: 47' Cub
49' H
55' 300U
47' Oliver 70 Row Crop
Mott mower
cultivators
#8 2-14 Little Genius Plow - Location: Brownsburg, IN
Re: Farmall H Wiring
Bigdog,
lights do not work. I have not tried to start however. when I turned the ignition on the gauge did not move. when I turned on the switch, it did not move.
I originally had a wire from the lag on the resister also to the F term on the VR, but it would spark when I tried to install the + ground battery cable. I quickly learned that was in-correct.
lights do not work. I have not tried to start however. when I turned the ignition on the gauge did not move. when I turned on the switch, it did not move.
I originally had a wire from the lag on the resister also to the F term on the VR, but it would spark when I tried to install the + ground battery cable. I quickly learned that was in-correct.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall H Wiring
You need a wire from the regulator side of the ammeter or from the L term of the regulator to the light switch and ignition switch.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 250
- Joined: Sun Aug 22, 2010 8:10 pm
- Zip Code: 46112
- Tractors Owned: 47' Cub
49' H
55' 300U
47' Oliver 70 Row Crop
Mott mower
cultivators
#8 2-14 Little Genius Plow - Location: Brownsburg, IN
Re: Farmall H Wiring
John,
from the the regulator side of the amp meter? this would be the discharge side?
if I choose the L on reg, where on light switch does it go?
Thanks
from the the regulator side of the amp meter? this would be the discharge side?
if I choose the L on reg, where on light switch does it go?
Thanks
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Farmall H Wiring
With a voltage regulator the hi-lo charge settings on the light switch are non-funcional. The wire from the ammeter to the fuse holder should be hot all the time. If you are using the fuse holder on the light switch be sure the contact surfaces are clean. They corrode really easily. If the fuse is good you should have power to the light switch. Follow this diagram ignoring the connection to the generator field:
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 250
- Joined: Sun Aug 22, 2010 8:10 pm
- Zip Code: 46112
- Tractors Owned: 47' Cub
49' H
55' 300U
47' Oliver 70 Row Crop
Mott mower
cultivators
#8 2-14 Little Genius Plow - Location: Brownsburg, IN
Re: Farmall H Wiring
Bigdog,
I used that exact diagram, and I still get a spark when trying to install battery ground cable. Fuse is not blown
I used that exact diagram, and I still get a spark when trying to install battery ground cable. Fuse is not blown
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Farmall H Wiring
Go back to the ammeter and remove that wire and see if you still get a spark. If not, the problem is in the light circuit. If you still get a spark the problem is somewhere else. Start disconnecting wires until the sparking stops. The last wire you removed will lead you to your problem.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 250
- Joined: Sun Aug 22, 2010 8:10 pm
- Zip Code: 46112
- Tractors Owned: 47' Cub
49' H
55' 300U
47' Oliver 70 Row Crop
Mott mower
cultivators
#8 2-14 Little Genius Plow - Location: Brownsburg, IN
Re: Farmall H Wiring
Bigdog, JOhn,
I am down to getting lights to work. When I pull out ignition, the amp gauge discharges as it should. Do the switches go bad? The lights worked before I began . I made sure the light wires are on correct terminals and they are. I also made sure the coil resistor was not touching anything or the switch itself. once in a while when I put the + cable on the bat. it sparks, but not all the time. when the light switch is turned on I have no lights nor does the gauge move.
I am down to getting lights to work. When I pull out ignition, the amp gauge discharges as it should. Do the switches go bad? The lights worked before I began . I made sure the light wires are on correct terminals and they are. I also made sure the coil resistor was not touching anything or the switch itself. once in a while when I put the + cable on the bat. it sparks, but not all the time. when the light switch is turned on I have no lights nor does the gauge move.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Farmall H Wiring
Connect the wire from the fuse lug to the L terminal of the regulator. Switches do go bad. Do you have a volt - ohmmeter? That or a test light will help us troubleshoot this.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall H Wiring
Switches do go bad, but usually you can rock them back and forth and get a connection. What happens more often is the clips that hold the fuse get some corrosion on them and it loses connection. clean the inside of the clip[ good with a fine brass brush, or temporarily use a clip to bypass it. One other thing, do not overlook the ground on the lights. If you have painted them you may not have a good ground, either where they mount or inside the light. If it is the tear drop light there is a little copper strip inside the light that presses against the side of the reflector for the ground.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 250
- Joined: Sun Aug 22, 2010 8:10 pm
- Zip Code: 46112
- Tractors Owned: 47' Cub
49' H
55' 300U
47' Oliver 70 Row Crop
Mott mower
cultivators
#8 2-14 Little Genius Plow - Location: Brownsburg, IN
Re: Farmall H Wiring
To all those who helped - THANK YOU! problems seemed to be fixed. fuse holder on the 4-post switch was dirty.
Tractor fired right up and lights worked.
Thanks Again
Tractor fired right up and lights worked.
Thanks Again
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0
- 1112
-
by Tractorboy3
Wed Nov 17, 2021 3:10 pm
-
-
Wiring diagram for a Farmall 300
by Roger G. » Thu Oct 21, 2021 8:11 pm » in Farmall H, HV, Super H, 300 & 350 - 2
- 1305
-
by ShawnAgne
Sun Oct 24, 2021 11:04 am
-
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 2 guests