This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Another 3160 Mower question, idle pulley bearing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 69
- Joined: Wed Apr 25, 2007 10:52 am
- Zip Code: 16218
- Location: Kittanning, PA
Another 3160 Mower question, idle pulley bearing
Has anyone had any luck purchasing a replacement bearing for the idle adjustment pulleys on the back of the mower frame? Trying to rehab this old mower deck and seems like all the bearings are shot. The part number from Rudi's manual say's 543126R91. I would like to go to napa to pick up a new bearing and was wondering if anyone had the part number. The bearing itself says NICE 7842-7 on it.
Steve
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
-
- 10+ Years
- Posts: 134
- Joined: Tue Aug 03, 2010 11:34 am
- Zip Code: 46975
Re: Another 3160 Mower question, idle pulley bearing
When i got my 185, the PO had put one of those cheapy Tractor Supply pulleys on it. The bearing was bad and being the cheap-geezer that I am, I drilled the rivets out and popped in a new bearing for $3.00, (make note to self, don't use aluminum rivets to rivet it back together). The other idler is the original cast one and is still good. Anyway . . . one of those is a doable option. You just have to fashion some spacers to get away from the bracket.
-
- 10+ Years
- Posts: 89
- Joined: Thu Aug 09, 2007 2:07 pm
- Zip Code: 01050
- Tractors Owned: 1963 MF 202
1953 Super C
1949 Cub
1970 LoBoy 154
1949 M - Location: Western Mass.
Re: Another 3160 Mower question, idle pulley bearing
A half decent bearing shop should be able to get you new ones by crossing the number on the bearing or by measuring a sample that you bring to them. I learned that the old IH part numbers don't usually cross reference.
Good luck!
Good luck!
Karl
-
- 10+ Years
- Posts: 69
- Joined: Wed Apr 25, 2007 10:52 am
- Zip Code: 16218
- Location: Kittanning, PA
Re: Another 3160 Mower question, idle pulley bearing
Hi all
Got the job done!! Went to a bearing shop and the only way to get the bearing is from NICE itself and they are available. $33.00. Ouch. So i checked out TSC and they have the bearing that matches for $6.00 but it doesn't have the spacer on it to offset the pulley away from the bracket. So i was thinking why not use bushings to make it work. Takes two different bushing to get it done for around $10 bucks. So i start thinking what the heck lets go to IH and for giggles see if they can get it first and save a bunch of aggravation. So sure enough my IH shop had it in stock and $20 bucks later I am ready to put it back together. So if anyone runs into this again just head to IH or I also saw them available on Parts tree dot com for $23.00
Got the job done!! Went to a bearing shop and the only way to get the bearing is from NICE itself and they are available. $33.00. Ouch. So i checked out TSC and they have the bearing that matches for $6.00 but it doesn't have the spacer on it to offset the pulley away from the bracket. So i was thinking why not use bushings to make it work. Takes two different bushing to get it done for around $10 bucks. So i start thinking what the heck lets go to IH and for giggles see if they can get it first and save a bunch of aggravation. So sure enough my IH shop had it in stock and $20 bucks later I am ready to put it back together. So if anyone runs into this again just head to IH or I also saw them available on Parts tree dot com for $23.00
Steve
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
-
- 10+ Years
- Posts: 1068
- Joined: Sat Dec 10, 2005 4:31 pm
- Zip Code: 66839
- Circle of Safety: Y
- Location: KS. Burlington
Re: Another 3160 Mower question, idle pulley bearing
Does anyone know parts numbers for replacement bearing. I only have number nice 7042-7. Can not find cross reference. Thanks Bob
-
- 10+ Years
- Posts: 1068
- Joined: Sat Dec 10, 2005 4:31 pm
- Zip Code: 66839
- Circle of Safety: Y
- Location: KS. Burlington
Re: Another 3160 Mower question, idle pulley bearing
spgeid wrote:Has anyone had any luck purchasing a replacement bearing for the idle adjustment pulleys on the back of the mower frame? Trying to rehab this old mower deck and seems like all the bearings are shot. The part number from Rudi's manual say's 543126R91. I would like to go to napa to pick up a new bearing and was wondering if anyone had the part number. The bearing itself says NICE 7842-7 on it.
My pulley has part number 543125R1 and bearing number is nice 7042-7.
Are they the same thing? Thanks Bob
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Looking for belt size for mower 3160 deck Attachment(s)
by Dan Stuckey » Tue May 31, 2022 8:32 pm » in Lo-Boy Series - 154, 184, 185 - 1
- 401
-
by indy61
Wed Jun 01, 2022 5:15 am
-
-
- 6
- 429
-
by outdoors4evr
Fri Aug 12, 2022 5:22 am
-
-
Cub Low Boy 154 Mower question?
by Hausfire28 » Sun Mar 31, 2024 8:07 pm » in Lo-Boy Series - 154, 184, 185 - 2
- 114
-
by outdoors4evr
Wed Apr 17, 2024 7:34 am
-
-
- 7
- 369
-
by Eugene
Mon Feb 13, 2023 10:28 am
-
-
184 PTO shaft forward bearing
by Gabe184 » Sun Apr 24, 2022 7:22 am » in Lo-Boy Series - 154, 184, 185 - 0
- 238
-
by Gabe184
Sun Apr 24, 2022 7:22 am
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: SONNY and 3 guests