This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub hydraulic pump Parts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 3
- Joined: Fri Jun 10, 2011 12:33 pm
- Zip Code: 06109
Cub hydraulic pump Parts
1953 Cub recent purchase. When I got it the touch control pump and lines were removed and both areas blocked off with plates. I have the pump and the lines and am planning on a reinstallation to figure out if it works or leaks or that there was a reason why it was removed. I am starting with the pump that I split in two to make sure that there wasn't any dirt or debris inside. In between the 2 gears on one side of them was a black blob of plastic. I removed it as it looked more like RTV that got into the system and lodged there than a machined part. I see a part called a bearing seal pin. #10 on most parts illustrations from IH. Is this what I removed? Was it really plastic? Do I need it? Can I gt it?
-
- Cub Pro
- Posts: 2293
- Joined: Tue Sep 02, 2008 3:46 pm
- Zip Code: 54911
- Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower - Circle of Safety: Y
Re: Cub hydraulic pump Parts
viewtopic.php?f=11&t=44196
Welcome to the forum!
this "How to" covers the parts very well in the rebuild
Sounds like an O ring remains/scrap in there to me
Welcome to the forum!
this "How to" covers the parts very well in the rebuild
Sounds like an O ring remains/scrap in there to me
-
- 10+ Years
- Posts: 3
- Joined: Fri Jun 10, 2011 12:33 pm
- Zip Code: 06109
Re: Cub hydraulic pump Parts
I will look Thanks Great forum
-
- Cub Pro
- Posts: 2293
- Joined: Tue Sep 02, 2008 3:46 pm
- Zip Code: 54911
- Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower - Circle of Safety: Y
Re: Cub hydraulic pump Parts
The link I posted should take you right to the topic on the pump rebuild.
Sounds like you are off to a great start in fixing the issue!
Sounds like you are off to a great start in fixing the issue!
-
- 10+ Years
- Posts: 3
- Joined: Fri Jun 10, 2011 12:33 pm
- Zip Code: 06109
Re: Cub hydraulic pump Parts
It looks like I can rebuild from that great post. I do however see a part as a bearing seal pin. Because it is installed it is hard to make out what it looks like but is a part and mine was damaged. I assume that that seal and gasket kit is available and should include that pin
-
- Cub Pro
- Posts: 2293
- Joined: Tue Sep 02, 2008 3:46 pm
- Zip Code: 54911
- Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower - Circle of Safety: Y
Re: Cub hydraulic pump Parts
TM tractor is a site sponsor and have great service and reasonable prices
http://www.tmtractor.com/new/hy/288fp.htm
here is the kit, no key/pin though
maybe Case IH sells the pin, not sure
http://www.tmtractor.com/new/hy/288fp.htm
here is the kit, no key/pin though
maybe Case IH sells the pin, not sure
-
- Cub Pro
- Posts: 852
- Joined: Fri May 09, 2008 2:47 pm
- Zip Code: 74022
- Tractors Owned: 8 F Cubs, 7 Lo-Boys, 2 # LoBoys, 1 CC, 1 H, 1 other
- Circle of Safety: Y
- Location: OK, Copan
Re: Cub hydraulic pump Parts
If you look at TM's picture of the kit, that little black dot towards the bottom is the pin.
Depending on which version of the pump you have, it may not use the bushing seal pin.
Depending on which version of the pump you have, it may not use the bushing seal pin.
Have a good day, Art
-
- Team Cub Mentor
- Posts: 17524
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Cub hydraulic pump Parts
When new, the seal looks like a miniature hockey puck. Yes, you need it. No, you can't buy it seperately. You'll need to buy the whole pump rebuild kit. Might as well do the whole job while you have it split.
-
- 10+ Years
- Posts: 1
- Joined: Tue Dec 04, 2012 8:00 pm
- Zip Code: 24067
Re: Cub hydraulic pump Parts
Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one?
Dan
Dan
-
- 10+ Years
- Posts: 6352
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Cub hydraulic pump Parts
Sharkmaster wrote:I will look Thanks Great forum
Best Cub website on the planet!!!!!!
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
- Team Cub Mentor
- Posts: 17524
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Cub hydraulic pump Parts
Dan,
Your chances of finding just the drive gear are pretty slim. Your best bet will be to look for a reasonably priced used pump. Post a "wanted" ad here and keep an eye out on eBay.
Your chances of finding just the drive gear are pretty slim. Your best bet will be to look for a reasonably priced used pump. Post a "wanted" ad here and keep an eye out on eBay.
-
- Team Cub Mentor
- Posts: 20399
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Cub hydraulic pump Parts
Is it the drive gear off the front of the hydraulic pump? If you need one of the gears inside the pump, then you need to purchase a complete hydraulic pump. In any event, you can advertise in the for sale/wanted section of this site.The Ridge wrote:Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one? Dan
I have an excuse. CRS.
-
- 10+ Years
- Posts: 449
- Joined: Wed Feb 05, 2003 11:49 pm
- Zip Code: 71328
- Location: LA, Deville
Re: Cub hydraulic pump Parts
About 10 years ago I priced just the drive gear at my local Case-IH dealership. I seem to recall them wanting around $135 for one back then.
Old Age: The phase of life when nothing works and everything hurts...
-
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
Re: Cub hydraulic pump Parts
Did your gear get all chewed up or is it missing (as in came off the shaft)...
-
- 10+ Years
- Posts: 4565
- Joined: Wed Feb 05, 2003 1:18 pm
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
- Location: OH, Sidney
Re: Cub hydraulic pump Parts
The Ridge wrote:Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one?
Dan
Have you looked in the oil pan?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 24
- 656
-
by Glen
Wed Apr 12, 2023 8:40 pm
-
- 6
- 273
-
by coppersmythe
Sat May 07, 2022 9:20 pm
-
- 2
- 181
-
by Glen
Sun Sep 04, 2022 5:18 pm
-
-
Key stuck in hydraulic pump Attachment(s)
by Workinprogress » Tue Jun 14, 2022 5:09 pm » in Farmall Cub - 18
- 410
-
by Dale Finch
Thu Jun 16, 2022 7:30 am
-
-
-
Hydraulic help - pump cavitation with loader Attachment(s)
by cobra2411 » Sun Jan 09, 2022 9:41 pm » in Farmall Cub - 35
- 1019
-
by ricky racer
Thu Feb 03, 2022 11:09 am
-
Who is online
Users browsing this forum: No registered users and 5 guests