This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
How not to remove a crank pulley
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 3562
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
How not to remove a crank pulley
This is what happens when the wrong tools are used to pull the crankshaft pulley off.
Correct method:
Correct method:
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
-
- Cub Pro
- Posts: 7511
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: How not to remove a crank pulley
Dave, my fingers, and pulley puller look so pretty in the pictures. If I had known we were going to be internet stars, I'd have washed the fingers and painted the tool, and been even prettier! Ed
-
- 10+ Years
- Posts: 30
- Joined: Tue Sep 27, 2011 8:40 pm
- Zip Code: 12725
- Tractors Owned: '50 Farmall Cub
'71 Int'l Cub - Circle of Safety: Y
- Location: Claryville NY; Brooklyn NY
Re: How not to remove a crank pulley
Thanks Cecil, Ed, and everyone else for helping me get that pulley off and all the help and advice with the block. The right tool makes all the difference!
Great pictures Dave - I hope people find this post before trying to use just a two jaw puller!
Great pictures Dave - I hope people find this post before trying to use just a two jaw puller!
-
- 10+ Years
- Posts: 3562
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: How not to remove a crank pulley
Here's a couple videos we shot at the Cubfest.
Removing a pulley
Installing a pulley
Removing a pulley
Installing a pulley
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
-
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
Re: How not to remove a crank pulley
I dreamt i was in a Hollywood movie - and i was the star!
good teaching video, Dave!
good teaching video, Dave!
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: How not to remove a crank pulley
The videos are now in the Video How To Forum and will be in the CBoK in a while. Excellent video Dave and yup just like Edwin said - Art ya is a star But then we already knew that
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 84
- Joined: Sat Aug 06, 2011 6:44 am
- Zip Code: 25526
- Tractors Owned: Kubota MX5100
1968 Cub Lowboy - Circle of Safety: Y
- Location: Hurricane, WV
Re: How not to remove a crank pulley
Did you built the crank pulley remover or is it commercially available?
1968 Cub Low Boy
Kubota MX5100
Kubota MX5100
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: How not to remove a crank pulley
Earl Fauble makes the pulley pullers. Many of us have them including me..
Specialty Services page on the server
Earl also makes a lot of different things some of which are on the server. I need to get an updated list/pics etc from Earl and BD hint hint BD
Specialty Services page on the server
Earl Fauble
6991 Sixteenth Rd
Amanda
Ohio
43102
Phone: (740) 969-2927
Email: Earl is experiencing computer problems so in the Interim, please send all email inquiries to Darrell Ratliff aka "Big Dog"
Earl's Pulley Puller
Earl also makes a lot of different things some of which are on the server. I need to get an updated list/pics etc from Earl and BD hint hint BD
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Cub Pro
- Posts: 5762
- Joined: Mon Jul 30, 2007 11:48 am
- Zip Code: 32460
- eBay ID: noles1432460
- Circle of Safety: Y
- Location: FL, Sneads
Re: How not to remove a crank pulley
Watching the video of installing the pulley back on the cub. Dumb question, from a non-mechanic. How do you know when the pulley is "home"? Does it contact a flange, or what?
Thanks for your assistance.
Roy
Thanks for your assistance.
Roy
In the middle of every difficulty lies opportunity. - Albert Einstein
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
-
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
Re: How not to remove a crank pulley
stop when the pulley edge is about a 1/4 inch from the tip of the timing indicator. if you dont, you run the risk of twisting off the threaded rod or trashing the threads in the crank.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
- Cub Pro
- Posts: 4565
- Joined: Fri Nov 18, 2005 4:27 pm
- Zip Code: 06076
- Circle of Safety: Y
- Location: CT, Stafford Springs
Re: How not to remove a crank pulley
Interestingly enough the busted up pulley was replaced with a brand new IH pulley. Cecil cooked it for about a half hour in his shop toaster oven at 350 degrees.
Engine was sitting on the bench with the crankshaft vertical. He started the pulley on crankshaft gave it hit with his fist and it dropped right on. ....that was easy!
Peter
Engine was sitting on the bench with the crankshaft vertical. He started the pulley on crankshaft gave it hit with his fist and it dropped right on. ....that was easy!
Peter
1957 Farmall Cub "Emory", Fast-Hitch, L-F194 Plow & Colter, L-38 Disc Harrow, Cub-54A Blade, Cub-22 Sickle Bar Mower, IH 100 Blade
-
- Cub Pro
- Posts: 7511
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: How not to remove a crank pulley
code54 wrote:Did you built the crank pulley remover or is it commercially available?
The puller in the "still" photos is mine, homemade, because Earl was out of them, when I needed it. Earl's is much lighter, and easier to handle. Mine really needs 2 people to handle it, but it has never failed to do its job. Ed
-
- 10+ Years
- Posts: 3034
- Joined: Wed May 31, 2006 12:09 pm
- Zip Code: 74070
- Circle of Safety: Y
- Location: OK, Skiatook
Re: How not to remove a crank pulley
Mr E wrote:Watching the video of installing the pulley back on the cub. Dumb question, from a non-mechanic. How do you know when the pulley is "home"? Does it contact a flange, or what?
Thanks for your assistance.
Roy
I also install mine with an air wrench and you can readily tell when the pulley seats as the sound from the wrench will change--haven't lost any threads yet
-
- 10+ Years
- Posts: 552
- Joined: Sat Dec 25, 2010 6:31 am
- Zip Code: 44333
- Tractors Owned: Farmall cub 56-Spartacus
International cub 76
Cub L-F 194 Plow
Cub F38 Disk Harrow
Cub L-F1 Platform Carrier
Cub 54 Leveling Blade - Circle of Safety: Y
- Location: Copley, Oh
Re: How not to remove a crank pulley
Really like the how to video's great job! Pabst
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 279
-
by john2189
Wed Jun 23, 2021 8:41 am
-
- 2
- 198
-
by tst
Thu May 26, 2022 9:51 pm
-
- 6
- 494
-
by Greg49G
Mon Dec 13, 2021 6:17 pm
-
-
How would you Remove this Continental Belton Mower? Attachment(s)
by buddylindsey » Sat Apr 27, 2024 9:56 pm » in Farmall Cub - 5
- 227
-
by tmays
Mon Apr 29, 2024 8:19 pm
-
-
-
Can't remove front axle pivot pin Attachment(s)
by radioguy41 » Fri Dec 22, 2023 9:05 am » in Farmall Cub - 25
- 1892
-
by Urbish
Tue Feb 13, 2024 10:41 am
-
Who is online
Users browsing this forum: No registered users and 1 guest