This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Fitting...a 982 Rear Tiller.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 602
- Joined: Wed Apr 20, 2005 6:41 am
- Location: Norwich,Ontario
Fitting...a 982 Rear Tiller.
Will a any 3 pt. Cub Cadet rear Tiller work on a 982 with 3pt.?
IHC made a quality machine and was leader of the pack.Let's keep them running,
-
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Fitting...a 982 Rear Tiller.
Red,
NO. Only the tillers made for the 982 (and other super garden tractors) will work. They have the PTO coupler sized appropriately (1-inch rather than standard 1 3/8-inch), and the gear box is set up to handle the engine speed PTO (NOT 540 rpm standard PTO speed), and it turning in the wrong direction. Also, I believe that the 982 and other SGTs are Cat-0 3-point hitch.
Cub Cadet made tillers for their compact diesel tractors, which are Cat-1 3-point hitch and 540 rpm PTO. These will obviously NOT work on a 982 or SGT.
I just saw a tiller for a SGT for sale on Craigslist in Rochester, NY or Finger Lakes (I believe). I'll have to look again. These are getting really hard to find, and I almost just went ahead and bought it because I knew someone would be looking for one.
Bill
NO. Only the tillers made for the 982 (and other super garden tractors) will work. They have the PTO coupler sized appropriately (1-inch rather than standard 1 3/8-inch), and the gear box is set up to handle the engine speed PTO (NOT 540 rpm standard PTO speed), and it turning in the wrong direction. Also, I believe that the 982 and other SGTs are Cat-0 3-point hitch.
Cub Cadet made tillers for their compact diesel tractors, which are Cat-1 3-point hitch and 540 rpm PTO. These will obviously NOT work on a 982 or SGT.
I just saw a tiller for a SGT for sale on Craigslist in Rochester, NY or Finger Lakes (I believe). I'll have to look again. These are getting really hard to find, and I almost just went ahead and bought it because I knew someone would be looking for one.
Bill
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 602
- Joined: Wed Apr 20, 2005 6:41 am
- Location: Norwich,Ontario
Re: Fitting...a 982 Rear Tiller.
I would like any info on the 982 tiller. We may have talked on this topic before.
IHC made a quality machine and was leader of the pack.Let's keep them running,
-
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Fitting...a 982 Rear Tiller.
I looked earlier today and could not find it. I cannot remember exactly when I last saw it there, so it may already be gone. If I run across one I'll give you a shout.
Bill
Bill
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Re: Fitting...a 982 Rear Tiller.
I believe you will find that the rear PTO on a 982, or other super, turns at 2000 RPM, not engine speed. It is belt driven through an electric clutch, off the back of the hydro pump, and turns the same direction as the engine and hydro. The rear PTO on a Farmall/International Cub turns backwards and at engine speed, but one in a standard Cub Cadet turns backwards at 514 RPM at a engine speed of 3600 RPM.
Who is online
Users browsing this forum: No registered users and 0 guests