This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
130 Touch Control
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 133
- Joined: Fri Sep 02, 2011 6:22 pm
- Zip Code: 33876
Re: 130 Touch Control
Here is a picture that shows the plastic things. I have never replaced them, but probably should since plastic wants to break down over time and heat.
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: 130 Touch Control
Boss,
I found that #14 part listed as a check valve.
I can now see it in the pictures as well, they are plastic for sure.
Will make sure to order 4 new ones.
TW, Thanks for pic as well.
I found that #14 part listed as a check valve.
I can now see it in the pictures as well, they are plastic for sure.
Will make sure to order 4 new ones.
TW, Thanks for pic as well.
Just Do It !
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 130 Touch Control
not all break all the time and sometimes none are broke, but most of the time at least one will be cracked. I like to replace them myself
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: 130 Touch Control
Just now sent a message to my dealer to look it up and add to the kits I am already getting.
Almost forgot to order new boots as well.
Ed
Almost forgot to order new boots as well.
Ed
Just Do It !
-
- 10+ Years
- Posts: 527
- Joined: Sat Jul 17, 2010 10:41 am
- Zip Code: 46163
- Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184 - Circle of Safety: Y
- Location: New Castle, IN
Re: 130 Touch Control
Man those touch control blocks look complicated. Hope I don't have to tear one down any time soon.
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: 130 Touch Control
BigM,
They do look somewhat intimidating don't they?
I plan on making some kind of map or maybe a container with separate compartments for each piece so as to not get them mixed up. Seeing that the whole block should be cleaned, all the parts will have come out.
I did the same with the transmission. Taking pictures is also a good way to keep things going back the right way.
I'll try to post pics as I progress.
They do look somewhat intimidating don't they?
I plan on making some kind of map or maybe a container with separate compartments for each piece so as to not get them mixed up. Seeing that the whole block should be cleaned, all the parts will have come out.
I did the same with the transmission. Taking pictures is also a good way to keep things going back the right way.
I'll try to post pics as I progress.
Just Do It !
-
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: 130 Touch Control
The way I kept track of what parts went where is by using quart paint mixing cups. I have hundreds of them. If a hole contains parts 12,13,13a,15 or whatever, I marked each cup with masking tape what was in it. You can clean the parts a cup at a time. I also left all o rings on until I was ready to install the new ones so I could match them up.
Tom
Tom
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 130 Touch Control
They are not hard at all just keep everythig in order and lay the parts out on a CLEAN surface It will take you about an hour or so after you get it off and cleaned up.Remember that CLEAN is a big factor I float the o rings in Hy Tran in a cup before putting them on
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Re: 130 Touch Control
Jim Becker wrote:Billy,
I think all the internal Touch-Control parts are identical between the 100 and 130. If you don't have the parts catalog, you can find it on the Case-IH web site. Very few parts show 2 numbers and most of them list as interchangable. The 100 and 130 use the same book. Makes it easy to check parts between the 2 models.
Thanks Jim
I don't know how bad the rods on the 130 are as I can't really see them. But they were all the way extended when I got them and must have been like that for several years to be so rusted they didn't want to move. So I imagine they will need to be replaced or re-chromed.
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: 130 Touch Control
I think I had better take a look at the #14 Check Valves that we have been discussing and hope that they are all OK.
Here's my quote from CASE IH.
QTY PART # DESRIPTION UNIT PRICE EXT STATUS
4 354057r2 check valve @ $ 38.63 $ 154.52 3 days
1 354007r96 rebuild kit 135.60 135.60 3 days
4 364832r2 boot 17.63 70.52 3 "
Those prices are before tax. These are the costly items the rest of the stuff $5 or less ea.
Ed
Here's my quote from CASE IH.
QTY PART # DESRIPTION UNIT PRICE EXT STATUS
4 354057r2 check valve @ $ 38.63 $ 154.52 3 days
1 354007r96 rebuild kit 135.60 135.60 3 days
4 364832r2 boot 17.63 70.52 3 "
Those prices are before tax. These are the costly items the rest of the stuff $5 or less ea.
Ed
Just Do It !
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: 130 Touch Control
All the parts out of the TC unit. Filed and in order.
What are all these? And what do I do with them. They are in awful tight. The 2 half/inch nut things came out easy but not sure what they are.
These piston seals are likely the cause of all the leaking fluid.
Here's another look at all the stuff.
These are the 'bullets' that Boss was talking about. They appear in great shape. No cracks at all so they will be going back in.
Just Do It !
-
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: 130 Touch Control
The 2 "half inch nut things" should have little screens behind them. I usally get them out with a pocket screwdriver. I removed all the hex head screws inside and out to do a better job cleaning out passageways. Nice job on the box for keeping things in order by the way.
Tom
P.S. I also removed the welch (freeze?) plugs as well. .68 cents each ad J.D.
Tom
P.S. I also removed the welch (freeze?) plugs as well. .68 cents each ad J.D.
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: 130 Touch Control
Tom,
What did you use to remove those hex nuts? They are sure tight in there.
I was thinking an impact wrench. Certainly won't move by hand. I don't want to break anything.
So once everything is out you clean it up good with varsol and blow out all passages with air.
Hmmm, my manual does not mention removing the hex heads. Only the 2 half/inch nuts Relief Valves (that is the ones you mention there is a screen to take out and clean)
Those piston connecting rod nuts are a real bull as well. Have not removed them yet, and not sure I will attempt as it feels like something will break before those nuts come loose. I figure if I gotta put a pipe on the ratchet I'm asking for trouble.
Thanks for looking in.
Ed
What did you use to remove those hex nuts? They are sure tight in there.
I was thinking an impact wrench. Certainly won't move by hand. I don't want to break anything.
So once everything is out you clean it up good with varsol and blow out all passages with air.
Hmmm, my manual does not mention removing the hex heads. Only the 2 half/inch nuts Relief Valves (that is the ones you mention there is a screen to take out and clean)
Those piston connecting rod nuts are a real bull as well. Have not removed them yet, and not sure I will attempt as it feels like something will break before those nuts come loose. I figure if I gotta put a pipe on the ratchet I'm asking for trouble.
Thanks for looking in.
Ed
Just Do It !
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: 130 Touch Control
This is what should be in the kit to rebuild the block. Seal/Gasket Kit # 354 007 R96.
Looks like the kit # 360 957 R91 is no longer available for the pump rebuild so the 5 or 6 required items have to be ordered separately. The most important part being the shaft seal.
Just Do It !
-
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: 130 Touch Control
Ed, for the hex screws, I used a 3/8 drive hex head set. I had no problem at all with those. The connecting rods I put the rod in a vice with plywood on each side for protection and used a 1/2 drive impact gun. I only had trouble with one of those. You'll get it, just have an adult beverage and think about it for a few minutes, then just do it.
Tom
Tom
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 290
-
by tst
Wed Nov 17, 2021 1:16 pm
-
-
Touch control stop
by user8786 » Thu Oct 28, 2021 9:59 am » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 465
-
by Hunt_man777
Thu May 26, 2022 2:47 pm
-
-
-
Touch Control thoughts
by ShawnAgne » Sat Nov 27, 2021 9:44 am » in Farmall A, Super A, AV, 100, 130 & 140 - 0
- 210
-
by ShawnAgne
Sat Nov 27, 2021 9:44 am
-
-
-
Touch Control Question Attachment(s)
by Sterff89 » Sun Dec 04, 2022 3:28 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 8
- 396
-
by Sterff89
Fri Jan 27, 2023 5:15 pm
-
-
-
Pulling touch control valves
by ShawnAgne » Sun Dec 05, 2021 8:15 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 11
- 679
-
by workinonit
Mon Sep 19, 2022 6:30 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 0 guests