This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
soda blast today
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 297
- Joined: Fri Jul 30, 2010 3:44 pm
- Zip Code: 31558
- eBay ID: regwal
- Skype Name: regwal
- Tractors Owned: 3 Cubs 1 CC
1955 Cub Slow Poke
1955 Cub Lil Red
1954 Cub Poor Thing
Cub Cadet 86
2254 Husky - Location: St. Mary, GA
soda blast today
I just used a big box of soda through a HF spot blaster on an old Zenith carb. Mine did not turn out as well as pictures I’ve seen on the forum. I used nozzle that came with the blaster. Did I do something wrong? Should I use a smaller nozzle?
-
- 10+ Years
- Posts: 3562
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: soda blast today
I used the nozzle that came with my HF blaster [only came with one]....Maybe an air pressure issue?
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
-
- 10+ Years
- Posts: 2253
- Joined: Fri Sep 10, 2010 5:23 pm
- Zip Code: 39861
- Tractors Owned: 76 Cub Denim Springs
49 Cub Denim Springs
51 Cub Uncle Harvey
"Jacksonville" 53 Cub
"Jackson" 76 Cub
"Louie" 64 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Alvin" 72 Cub
"Ugly" 75 Cub
76 Cub Val
Mr. Kirkland" 77 Red Cub
77 Cub "Russell
76 Cub w/fast hitch "Edgar"
76 - 185 Cub Lo Boy
John Deere 2003 - 5320
Kubota 7060
Kubota 5400
Kubota 2680
John Deere 445
TO20 Ferguson - Circle of Safety: Y
- Location: Jakin Georgia
Re: soda blast today
I used Mr Roy's at DSCF and it cleaned my carb up like new, inside and out. Could be an air pressure issue.
"I ain't believing this!"
-
- 10+ Years
- Posts: 297
- Joined: Fri Jul 30, 2010 3:44 pm
- Zip Code: 31558
- eBay ID: regwal
- Skype Name: regwal
- Tractors Owned: 3 Cubs 1 CC
1955 Cub Slow Poke
1955 Cub Lil Red
1954 Cub Poor Thing
Cub Cadet 86
2254 Husky - Location: St. Mary, GA
Re: soda blast today
Is 120 # enough or should I go higher?
-
- 10+ Years
- Posts: 2253
- Joined: Fri Sep 10, 2010 5:23 pm
- Zip Code: 39861
- Tractors Owned: 76 Cub Denim Springs
49 Cub Denim Springs
51 Cub Uncle Harvey
"Jacksonville" 53 Cub
"Jackson" 76 Cub
"Louie" 64 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Alvin" 72 Cub
"Ugly" 75 Cub
76 Cub Val
Mr. Kirkland" 77 Red Cub
77 Cub "Russell
76 Cub w/fast hitch "Edgar"
76 - 185 Cub Lo Boy
John Deere 2003 - 5320
Kubota 7060
Kubota 5400
Kubota 2680
John Deere 445
TO20 Ferguson - Circle of Safety: Y
- Location: Jakin Georgia
-
- Cub Pro
- Posts: 2779
- Joined: Sun Jul 01, 2007 10:07 pm
- Zip Code: 29518
- Circle of Safety: Y
- Location: SC, Cades 29518
Re: soda blast today
120 is likely too high, you may be eroding some metal with the dry soda....40 -60 is likely more than enough to clean, even if it takes 2 or 3 passes....
Rick Spivey
'52 Cub ("Great Personality") 148xxx
'48 Cub with FH ("Gunny Cub") 38xxx
'57 Lambretta (a slow work in progress)
'74 Triumph TR6 (Mama's toy)
'52 Cub ("Great Personality") 148xxx
'48 Cub with FH ("Gunny Cub") 38xxx
'57 Lambretta (a slow work in progress)
'74 Triumph TR6 (Mama's toy)
-
- 10+ Years
- Posts: 297
- Joined: Fri Jul 30, 2010 3:44 pm
- Zip Code: 31558
- eBay ID: regwal
- Skype Name: regwal
- Tractors Owned: 3 Cubs 1 CC
1955 Cub Slow Poke
1955 Cub Lil Red
1954 Cub Poor Thing
Cub Cadet 86
2254 Husky - Location: St. Mary, GA
Re: soda blast today
The HF unit has a max of 90#. I was using around 70#. I guess I expected better results with a steady movement. I wonder what would happen if the carb was put in a e-tank? The hardware is pretty rusty but moves freely.
-
- Team Cub
- Posts: 11880
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: soda blast today
Reg, When Tim did his at DSCF, it came out looking brand new. Dusty gave me the one off Katrina that looked like it had be used in an oyster bed. Tim and John C blasted it. All of the crud was removed, but it remained a darker, tarnished gray color. I'm not sure if that was a result of the soaking, or the nature of the metal.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 148
- Joined: Wed Feb 05, 2003 1:20 pm
- Zip Code: 95032
- Tractors Owned: 2- 1952 Cubs
- Location: CA, Los Gatos
Re: soda blast today
I did mine with the HF standard nozzle and it cleaned well. I did feel that I was spraying too wide a pattern though. I had a piece of 1/4 inch OD tubing and inserted a short piece(1 inch or so) into the end of nozzle It was a snug fit and didn't come out when I used it. The opening was reduced to around 1/8 inch . I used about 80 to 90 lbs of air and it seemed to work much better with the smaller opening because of better control to direct the flow, and I used a lot less baking soda. By the way, my COSTCO has 13 pound bags of baking soda for $6.79.
-
- 10+ Years
- Posts: 7840
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: soda blast today
regwal wrote:The HF unit has a max of 90#. I was using around 70#. I guess I expected better results with a steady movement. I wonder what would happen if the carb was put in a e-tank? The hardware is pretty rusty but moves freely.
Do not put in the "E" TANK
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
-
- 10+ Years
- Posts: 297
- Joined: Fri Jul 30, 2010 3:44 pm
- Zip Code: 31558
- eBay ID: regwal
- Skype Name: regwal
- Tractors Owned: 3 Cubs 1 CC
1955 Cub Slow Poke
1955 Cub Lil Red
1954 Cub Poor Thing
Cub Cadet 86
2254 Husky - Location: St. Mary, GA
Re: soda blast today
what about the hardware Mike? That should be ok wouldn't it?
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
Re: soda blast today
I recently cleaned three nasty carbs in Berryman's (Walmart 18 dollars) carbs came out looking brand spanking new , no exageration this Berrymans is Awesome stuff
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: soda blast today
I like the Berrymans, it works great like Jackman stated.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: soda blast today
Just one thing, for some reason , some carbs do not come out looking as good as others be it blasted or soaked.
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 297
- Joined: Fri Jul 30, 2010 3:44 pm
- Zip Code: 31558
- eBay ID: regwal
- Skype Name: regwal
- Tractors Owned: 3 Cubs 1 CC
1955 Cub Slow Poke
1955 Cub Lil Red
1954 Cub Poor Thing
Cub Cadet 86
2254 Husky - Location: St. Mary, GA
Re: soda blast today
Yep Boss, thinking I have one of those. I stepped the blaster nozzle size down, reduced pressure and went over again with same result. I plan to make a small e-tank from a 1/2 gallon bucket today and clean the choke and throttle plate parts. I hope when done I get this thing back together. I found a 1/2 page diagram of a Zenith searching through the manuals. Can anyone point me towards a larger one?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Fun day at the tractor drive today Attachment(s)
by Arthur Dent » Mon Sep 04, 2023 7:05 pm » in Farmall Cub - 4
- 703
-
by cdahl383
Fri Sep 15, 2023 3:11 pm
-
Who is online
Users browsing this forum: No registered users and 3 guests