This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
cheap welder
Forum rules
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.
FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.
Send issues regarding reviews to Cub@farmallcub.com.
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.
FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.
Send issues regarding reviews to Cub@farmallcub.com.
-
- 10+ Years
- Posts: 49
- Joined: Tue Aug 09, 2011 11:59 am
- Zip Code: 27021
- Tractors Owned: 1951 cub
- Circle of Safety: Y
- Location: king, north carolina
cheap welder
just bought one of these little welders and can not believe how powerful it is. I am not a professional welder and can make some really nice looking welds with it. I just used it to make some repairs to my lawn mower deck and frame. http://www.amazon.com/Pro-Grade-Ultra-P ... pd_cp_hi_0 I know everyone with a cub is going to need some welding done at one time or another and thought I would share a good and cheap welder with every one. I have a separate circuit in my garage that runs my compressor it is a 30 amp breaker on 10/2 wiring .I have been using the welder on that circuit with a 15 foot 12 gauge cord and have no problems. and can reach any where I need to in the garage! The welder I got is exactly the one in the picture...some of the reviews say they got a different one. anyway thought I would share a good product.
-
- 10+ Years
- Posts: 643
- Joined: Thu Jan 19, 2006 11:37 am
- Zip Code: 24153
- Tractors Owned: 1950 Allis Chalmers B, 1942 Farmall H,Kubota B2150hst
48 Cubplow,cultiv,carry all,blade.other stuff
and other junk - Location: SALEM VA.
Re: cheap welder
Pay close attention to the duty cycle on these"buzz boxes",They are made with aluminum windings and will overheat and burn it up,
-
- 10+ Years
- Posts: 49
- Joined: Tue Aug 09, 2011 11:59 am
- Zip Code: 27021
- Tractors Owned: 1951 cub
- Circle of Safety: Y
- Location: king, north carolina
Re: cheap welder
although this little welder is about the size of a lunch box it weighs about 34 pounds. and has a cooling fan in the back that is the same size as the housing it is in and comes on when you turn it on.. you can look through the vent louvers in the sides and see that the windings are copper.
-
- 10+ Years
- Posts: 64
- Joined: Sat Feb 10, 2007 10:52 pm
- Zip Code: 28650
- Tractors Owned: 1948 (Catie) and 1949 Cubbies (Dad's original) and 1972 Massy Ferguson 135
- Location: 1/2 Way between Maiden & Denver; Mooresville & Lincolnton; Charlotte&Hickory, NC.
Re: cheap welder
You do need to pay attention to the duty cycle. Do NOT push it or you will discover that the copper looking windings turn into an aluminum puddle. A lot of well pump motor windings are the same thing, you only think you have copper. They sure make them look like copper, even on close examaination, or at least until you cut into it. In addition to the transformer windings you have some diodes that do not like heat so do yourself a favor and take an extra sip of coffee between welds, hey, maybe even a cigarette.
-
- 10+ Years
- Posts: 1050
- Joined: Tue Apr 26, 2011 10:47 am
- Zip Code: 44266
- Tractors Owned: 48 F Cub #11678
65 Cub Cadet 104
70 450C JD loader
67 Cub Cadet 107
90 B7100HST-D Kubota
72 Cub Cadet 149
54 Super C - Circle of Safety: Y
- Location: Ravenna, Ohio
Re: cheap welder
I read the reviews listed with the welder and it seems most were happy with the machine. Several commented that it's barely hot enough to burn 1/8" rod, they had better success with 3/32". It should be ok for most sheet metal repairs and work ok for material up to maybe 1/4" but if you want to weld anything heavier it won't be very satisfactory. My experience has been hotter is better for good penetration and strong welds, especially on heavier metal.
-
- 10+ Years
- Posts: 165
- Joined: Thu Jan 06, 2011 10:56 am
- Zip Code: 20106
- Tractors Owned: 1950 Cub with 193 plow, snow plow. Woods 59 mower. unknown disk, John Deere spring-tooth harrow, 2009 New Holland T1510, Massey Ferguson Mod 25 Disc (I think)
- Circle of Safety: Y
- Location: Virginia near Front Royal
Re: cheap welder
I was once an iron worker and welder, We used the heavy duty stuff. After many years of not welding much, my wife pulled her car out in front of a truck and dented in the right rear quarter panel . I cut out the dented part and went to the junk yard, had them cut out a piece from an identical car. I matched them up and used a Campbell Hausfeld mini welder from Wal-Mart.
to splice them together. Worked fine since it was sheet metal. I don't know if those welders are wound differently or not , but worked fine for what I was doing. I wouldn't use it for heavy stuff or where safety was an issue. Hope you have good luck.
to splice them together. Worked fine since it was sheet metal. I don't know if those welders are wound differently or not , but worked fine for what I was doing. I wouldn't use it for heavy stuff or where safety was an issue. Hope you have good luck.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Anyone used a cheap carb on A-140 ?
by BullDAWG » Tue Jun 28, 2022 5:06 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 17
- 631
-
by farmall140223
Tue Mar 28, 2023 8:41 pm
-
Return to “Tool Talk and Reviews”
Who is online
Users browsing this forum: No registered users and 1 guest