My 1200 cub cadet has been cutting the lawn so far. First the mule belt wore out. I put a new one on. While cutting the high grass a stick got into the mule drive that i didn't notice and it cut the new belt in half. I fixed that. Then it started running rough and rich. Some how the choke cable setting loosened up. I readjusted the cable and readjusted the carb. She now runs like new again. Now the charging system stops charging. I ordered a new regulator. Do I have bad luck or what? My son restored the 1200 but we just threw in a used 12hp aqs engine and hoped for the best so far it runs great. I got it from the tractor club guys in Kent.
I just planeted another 1/2 acre of new grass and boy do i miss the 60" deck on the int154 now.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
I can't win lately but i'm not giving up.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
I can't win lately but i'm not giving up.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: I can't win lately but i'm not giving up.
The curse on my wifes 1200 continues. The head gasket went. I removed the head and found the exhaust gases ate there way up a head bolt hole in the head. But the piston is very tight telling me the engine has low hours on it. The valves look and feel great too. The guy in the kent tractor club sold me an awesome engine. But its marked 12hp on the sheetmetal cover and 14hp on the front housing. Now i can measure it to see what it really is. She went thru some high grass without a hesitation. Its got plenty of power.
I found a replacement head for now. But i'll weld up and machine the old head when i get a TIG welder. I been eyeing the new TIG inverter welding machines to piggy back off my hobart welder/generator. I want to add a MIG and TIG besides the 200amp 100% duty cycle arc welder it has.
I found a replacement head for now. But i'll weld up and machine the old head when i get a TIG welder. I been eyeing the new TIG inverter welding machines to piggy back off my hobart welder/generator. I want to add a MIG and TIG besides the 200amp 100% duty cycle arc welder it has.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: I can't win lately but i'm not giving up.
Bill,
Not sure if you thought of this already, but the bore and stroke are different between 12 and 14-hp engines. A simple measurement of the cylinder should tell you which you have. Easy to do with the head already off. If it's all bolted up, there's basically no way to tell.
Not sure if you thought of this already, but the bore and stroke are different between 12 and 14-hp engines. A simple measurement of the cylinder should tell you which you have. Easy to do with the head already off. If it's all bolted up, there's basically no way to tell.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: I can't win lately but i'm not giving up.
I just took out my 122 cadet that was stored and got it running after cleaning the points and carb since its been sitting for a year. I ran it in the high grass and the engine never wimpered at all the 48" deck just flew thru the tall grass. Before this 12hp would labor thru the tall grass so it needed a tune up.
I notice there is a big jump in power between the 12hp as and the 12hp aqs over the 10hp kohlers.
I notice there is a big jump in power between the 12hp as and the 12hp aqs over the 10hp kohlers.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Who is online
Users browsing this forum: No registered users and 2 guests