This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
future 184 c60 motor rebuild
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
future 184 c60 motor rebuild
So for the time being I did a quick overhaul on my c60 in my 184, but when it was apart I noticed it will need a valve job/valves and guides and I'm not totally satisfied with my overhaul, it seems to make a faint knock/rapping when reved up to top speed, I think it may be a rod, I platigauged the bearings and the no. 4 bearing was at max with a new bearing and that was the one that was down to copper, so the crank will need turning, anyway, just hoping it'll last the rest of the season and around thanksgiving I plan to pull the motor if it doesn't let go by then..lol Anyway, I plan to have it bored but don't know where I CAN GET THE CORRECT oversized dome pistons....anyone have any info on such???
-
- Cub Pro
- Posts: 4436
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: future 184 c60 motor rebuild
Contact HamiltonBob via the link below, he may be able to get you some good used ones.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: future 184 c60 motor rebuild
It seems you have the time so set up a search on ebay with email notifications. I keep a bunch of them running and keep refining keywords to weed out what I don't want. Eventually I was able to buy 4 new .020" over pistons for what the dealer charges for a single piston.
-
- 10+ Years
Re: future 184 c60 motor rebuild
RaymondDurban wrote:Contact HamiltonBob via the link below, he may be able to get you some good used ones.
I don't want used, I want new, oversized, ie.. .020, or .030
-
- Cub Pro
- Posts: 4436
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: future 184 c60 motor rebuild
mjr46 wrote:I don't want used, I want new, oversized, ie.. .020, or .030
Contact your local CaseIH dealer.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 4565
- Joined: Wed Feb 05, 2003 1:18 pm
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
- Location: OH, Sidney
Re: future 184 c60 motor rebuild
Have the machine shop get them when you have it bored.
-
- 10+ Years
Re: future 184 c60 motor rebuild
Denny Clayton wrote:Have the machine shop get them when you have it bored.
why?? can they get dome pistons cheaper??
-
- 10+ Years
- Posts: 4565
- Joined: Wed Feb 05, 2003 1:18 pm
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
- Location: OH, Sidney
Re: future 184 c60 motor rebuild
mjr46 wrote:Denny Clayton wrote:Have the machine shop get them when you have it bored.
why?? can they get dome pistons cheaper??
They'll most likely be competitive and if there are any problems or hangups it's on them, not you.
-
- 10+ Years
Re: future 184 c60 motor rebuild
I did, 80 a piston then 48 for the rings and another 48 for the pins, over 400 is outrageous, there has to be aftermarket out there that is competitiveRaymondDurban wrote:mjr46 wrote:I don't want used, I want new, oversized, ie.. .020, or .030
Contact your local CaseIH dealer.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: future 184 c60 motor rebuild
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: future 184 c60 motor rebuild
That kit has the bearings both rod and mains dome pistons rings pins and gaskets
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
Re: future 184 c60 motor rebuild
Wow, that saves me A BUNCH!!! , thanks BOSS!!!!Boss Hog wrote:That kit has the bearings both rod and mains dome pistons rings pins and gaskets
Boss
-
- 10+ Years
Re: future 184 c60 motor rebuild
well the rapping I've been hearing has developed into a rod knock...no doubt, so my overhaul didn't last long, I'm not suprised, I had a feeling it wasn't after opening motor up and seeing what I saw, however, it may be a wrist pin bushing, goona tear it apart in the next feew weeks and see if one of the new rod bearings crapped out, if not the wrist pin bushings are next to inspect, but its a sure thing the rebuild as the valves I know are in rough shape.
-
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: future 184 c60 motor rebuild
The #1 rod is the last one to get oil and is usually the first to go.
-
- 10+ Years
Re: future 184 c60 motor rebuild
bob in CT wrote:The #1 rod is the last one to get oil and is usually the first to go.
cool thanks for the info
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4
- 440
-
by SONNY
Thu Mar 24, 2022 1:09 pm
-
-
184 engine rebuild Attachment(s)
by rednax » Tue Apr 12, 2022 5:40 pm » in Lo-Boy Series - 154, 184, 185 - 27
- 1226
-
by outdoors4evr
Tue Aug 02, 2022 5:29 am
-
-
- 6
- 544
-
by SONNY
Fri Jan 07, 2022 4:02 pm
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests