This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Bushing # in Cub 45% angle pto pulley shaft
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 4
- Joined: Fri Oct 05, 2012 12:39 pm
- Zip Code: 74010
Bushing # in Cub 45% angle pto pulley shaft
I put a new bearing on the shaft that the belt pulley rides on. When I went to put on the oil seal, I noticed that it was 2 1/16ths larger there abouts than the pto shaft.The seal # is cr11223. Its 1 and 2/16ths dia while the shaft is 15/16ths dia.
I got on YT and someone said that I needed a bushing to go somewhere, but couldnt/didnt tell me the part# or exactly, to me, where it went. Can ya help me out??
I got on YT and someone said that I needed a bushing to go somewhere, but couldnt/didnt tell me the part# or exactly, to me, where it went. Can ya help me out??
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Bushing # in Cub 45% angle pto pulley shaft
I thought what was said there was fairly clear. Here is a picture. You need reference number 45 and either the pulley or number 46 to hold it in place.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Bushing # in Cub 45% angle pto pulley shaft
You might want to view this thread - Belt Pulley Gear Box Rebuild.
BTW, g'day to you.
BTW, g'day to you.
to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 5215
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
-
- 10+ Years
- Posts: 4
- Joined: Fri Oct 05, 2012 12:39 pm
- Zip Code: 74010
Re: Bushing # in Cub 45% angle pto pulley shaft
I called the IH dealer for Okla, or at least the Eastern 1/2 of it. Said those bushings had been deleated from stock decades ago. Anybody know where to find them?
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Bushing # in Cub 45% angle pto pulley shaft
You may want to try a local trades supply shop - bring in the old bushing and the dimensions needed. They may be able to provide the bushing that you need.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Bushing # in Cub 45% angle pto pulley shaft
Newer version, Tim.
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Bushing # in Cub 45% angle pto pulley shaft
Will have better info after I start to put it back together, but as Jim says that seal does run on the 'bushing' and the other bushing should be on the shaft with the bolt (and a thick 'washer' #48) on the end to keep it in place.
That bushing may be why my Mott mower gear box is leaking?? I will take that one apart after I finish mowing this weekend.
That bushing may be why my Mott mower gear box is leaking?? I will take that one apart after I finish mowing this weekend.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Bushing # in Cub 45% angle pto pulley shaft
Buzzard Wing wrote:that seal does run on the 'bushing' and the other bushing should be on the shaft with the bolt (and a thick 'washer' #48) on the end to keep it in place.
Well I just figured out what that weird part was on Granny's Belt Pulley Gear Box.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 4
- Joined: Fri Oct 05, 2012 12:39 pm
- Zip Code: 74010
Re: Bushing # in Cub 45% angle pto pulley shaft
I dont have EITHER collars/bushings. If I did I would have taken them if bad to a machine shop and had them made. IF I could get specs I should be able to do that anyway.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Bushing # in Cub 45% angle pto pulley shaft
Ok. We should know what all the dimensions are for the bushing while we are at Cecil's. There are a couple of Belt Pulley rebuilds slated. Of course Larry is in the midst of one now as well.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 4
- Joined: Fri Oct 05, 2012 12:39 pm
- Zip Code: 74010
Re: Bushing # in Cub 45% angle pto pulley shaft
Well, Thanks guys for the offers of help.
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Bushing # in Cub 45% angle pto pulley shaft
Up to my eyeballs at the moment, but may try to have a fellow Cub owner teach me a trick about 'sizing' the mystery center bearing.
I haven't taken the Mott mower's right angle pulley off yet (just mowed the fort with it yesterday) but I am thinking that bushing may be why it leaks (and lets water in).
Pictures are still in the camera....
I haven't taken the Mott mower's right angle pulley off yet (just mowed the fort with it yesterday) but I am thinking that bushing may be why it leaks (and lets water in).
Pictures are still in the camera....
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Bushing # in Cub 45% angle pto pulley shaft
Don:
I had forgotten Bill had done that article. Will print it out I think and take it with us.
I had forgotten Bill had done that article. Will print it out I think and take it with us.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 259
-
by Don McCombs
Fri Aug 06, 2021 10:17 am
-
- 10
- 520
-
by Greenthumbfarms
Sun Jan 23, 2022 3:24 pm
-
- 3
- 193
-
by Matt Kirsch
Fri Feb 10, 2023 2:33 pm
-
- 0
- 130
-
by ShawnAgne
Sun Aug 22, 2021 8:32 pm
-
-
International LoBoy L-54 Front Blade Hydraulic Angle Build Attachment(s)
by GoldenLoBoy » Wed Jul 14, 2021 8:43 pm » in Farmall Cub - 11
- 454
-
by ricky racer
Fri Jul 16, 2021 8:03 am
-
Who is online
Users browsing this forum: Majestic-12 [Bot], Masmith and 7 guests