This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
what am I doing wrong?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 204
- Joined: Fri Aug 26, 2011 5:59 am
- Zip Code: 24740
- Tractors Owned: '49 Farmall CUB #62395
'62 Cub Cadet
'69 Cub Cadet 73 w/Haban Sickle bar
'71 Cub Cadet 127
'76 Cub Cadet Sof76
'07 Cub Cadet LT1045
'09 Cub Cadet GT2544 - Circle of Safety: Y
- Location: Princeton, WV
what am I doing wrong?
OK.... I'm in the final stages of getting the Cub together and I've hit a little snag. I know this is probably real simple... How do you get the grille on? It's like it's about 1/2 too short if I get one side on, the other is just too short... I am making sure the tab is going in, any hints...???
-
- 10+ Years
- Posts: 2917
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
Re: what am I doing wrong?
Has this grille ever been on this tractor? Try removing all 4 of the screws. Push the grille into place and then replace the screws.
Luck favors those who are prepared
-
- 10+ Years
- Posts: 1629
- Joined: Mon Jan 29, 2007 7:09 pm
- Zip Code: 30114
- Tractors Owned: 1951 cub "Ms. Scarlett"
1962 Leora's loboy "Starburst" - Circle of Safety: Y
- Location: GA, Canton/Waleska
Re: what am I doing wrong?
You may have to bend it some, keep the doglegs loose, they should slide a little, until you get the grill on. a second pair of hands helps too.
-
- 10+ Years
- Posts: 204
- Joined: Fri Aug 26, 2011 5:59 am
- Zip Code: 24740
- Tractors Owned: '49 Farmall CUB #62395
'62 Cub Cadet
'69 Cub Cadet 73 w/Haban Sickle bar
'71 Cub Cadet 127
'76 Cub Cadet Sof76
'07 Cub Cadet LT1045
'09 Cub Cadet GT2544 - Circle of Safety: Y
- Location: Princeton, WV
Re: what am I doing wrong?
No... it is a brand new grille from TM that I painted, It is identical to the original, which won't go back on either... I know it can't be so, but it's like the front bolster is too wide holding it out at the bottom.... I'll try to get some pics.
-
- 10+ Years
- Posts: 204
- Joined: Fri Aug 26, 2011 5:59 am
- Zip Code: 24740
- Tractors Owned: '49 Farmall CUB #62395
'62 Cub Cadet
'69 Cub Cadet 73 w/Haban Sickle bar
'71 Cub Cadet 127
'76 Cub Cadet Sof76
'07 Cub Cadet LT1045
'09 Cub Cadet GT2544 - Circle of Safety: Y
- Location: Princeton, WV
Re: what am I doing wrong?
The doglegs are new too (tm also), if that matters...
Is there any way I could have the hood skewed, and the front bolts still go in the radiator supports?
Is there any way I could have the hood skewed, and the front bolts still go in the radiator supports?
-
- 10+ Years
Re: what am I doing wrong?
There is a trick to it.
I remove the bottom screws in both doglegs. Remove the rear screw in the top of the dog leg and loosen the front one.
I Barely attach the grill to the left dogleg, while facing the tractor(no reason, just works for me)
Then, press in on the grill and fasten the right side as well as possible.
Reinstall the screws you took out(starting them all before you tighten any)
Try to get a better bite on the side of the grill you fastened first.
tighten everything up
Someone helping that, is helpful,(not everyone that helps is helpful ) is a definite plus.
I remove the bottom screws in both doglegs. Remove the rear screw in the top of the dog leg and loosen the front one.
I Barely attach the grill to the left dogleg, while facing the tractor(no reason, just works for me)
Then, press in on the grill and fasten the right side as well as possible.
Reinstall the screws you took out(starting them all before you tighten any)
Try to get a better bite on the side of the grill you fastened first.
tighten everything up
Someone helping that, is helpful,(not everyone that helps is helpful ) is a definite plus.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: what am I doing wrong?
I would like to see a pic of the front of the cub showing the whole front
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 204
- Joined: Fri Aug 26, 2011 5:59 am
- Zip Code: 24740
- Tractors Owned: '49 Farmall CUB #62395
'62 Cub Cadet
'69 Cub Cadet 73 w/Haban Sickle bar
'71 Cub Cadet 127
'76 Cub Cadet Sof76
'07 Cub Cadet LT1045
'09 Cub Cadet GT2544 - Circle of Safety: Y
- Location: Princeton, WV
Re: what am I doing wrong?
Boss Hog wrote:I would like to see a pic of the front of the cub showing the whole front
Boss
tomorrow when I can get the garage door open... too cold and dark out now!
-
- 10+ Years
- Posts: 489
- Joined: Thu May 19, 2005 2:04 pm
- Zip Code: 35216
- Tractors Owned: 1947 Cub
1949 Cub
2011 JD X320 - Circle of Safety: Y
- Location: Birmingham Al/Bay Springs Ms.
Re: what am I doing wrong?
I am following this thread with interest, because I have exactly the same problem with my Cub radiator grill, except that it is the same one which came off the tractor when I started working on it.
Since retirement, the things I miss most are the holidays!
-
- 10+ Years
- Posts: 204
- Joined: Fri Aug 26, 2011 5:59 am
- Zip Code: 24740
- Tractors Owned: '49 Farmall CUB #62395
'62 Cub Cadet
'69 Cub Cadet 73 w/Haban Sickle bar
'71 Cub Cadet 127
'76 Cub Cadet Sof76
'07 Cub Cadet LT1045
'09 Cub Cadet GT2544 - Circle of Safety: Y
- Location: Princeton, WV
Re: what am I doing wrong?
thiggy wrote:I am following this thread with interest, because I have exactly the same problem with my Cub radiator grill, except that it is the same one which came off the tractor when I started working on it.
When I got mine last year it came with the original grille, but not on the tractor. I tried fitting it last year, but the old grille has apparently been bent in half at sometime during it's life and didn't fit right, so I didn't think anymore about it.
Like I said, the grille is new, doglegs new, hood original... I'll get some more pics after church this morning.
One other thing... how long should the bolts be? I picked up 1/4x1/2.... could it be the bolts are too short, or should there be a washer too?
-
- Team Cub
- Posts: 24272
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: what am I doing wrong?
gcbailey wrote:... how long should the bolts be? I picked up 1/4x1/2.... could it be the bolts are too short, or should there be a washer too?
That is the correct bolt size. No washers required. They should be truss bolts. Yours look a bit different.
Photo from TM Tractor Parts
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 489
- Joined: Thu May 19, 2005 2:04 pm
- Zip Code: 35216
- Tractors Owned: 1947 Cub
1949 Cub
2011 JD X320 - Circle of Safety: Y
- Location: Birmingham Al/Bay Springs Ms.
Re: what am I doing wrong?
1/2" should be long enough. They are pan head truss, with about a 1/2" diameter head, I believe.
Since retirement, the things I miss most are the holidays!
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: what am I doing wrong?
Without see the front pic yet I am guessing the bolster has been welded
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 204
- Joined: Fri Aug 26, 2011 5:59 am
- Zip Code: 24740
- Tractors Owned: '49 Farmall CUB #62395
'62 Cub Cadet
'69 Cub Cadet 73 w/Haban Sickle bar
'71 Cub Cadet 127
'76 Cub Cadet Sof76
'07 Cub Cadet LT1045
'09 Cub Cadet GT2544 - Circle of Safety: Y
- Location: Princeton, WV
Re: what am I doing wrong?
Barnyard wrote:gcbailey wrote:... how long should the bolts be? I picked up 1/4x1/2.... could it be the bolts are too short, or should there be a washer too?
That is the correct bolt size. No washers required. They should be truss bolts. Yours look a bit different.
Photo from TM Tractor Parts
I know mine are different than the original.... all TSC had, and Lowe's didn't have any either. I may have to order some from McMaster Carr.... What I have is a "flat bottom" bolt, no bevel, but I didn't know how much smaller the head was than the factory.
-
- 10+ Years
- Posts: 204
- Joined: Fri Aug 26, 2011 5:59 am
- Zip Code: 24740
- Tractors Owned: '49 Farmall CUB #62395
'62 Cub Cadet
'69 Cub Cadet 73 w/Haban Sickle bar
'71 Cub Cadet 127
'76 Cub Cadet Sof76
'07 Cub Cadet LT1045
'09 Cub Cadet GT2544 - Circle of Safety: Y
- Location: Princeton, WV
Re: what am I doing wrong?
OK, here are some more pics.... I don't see any welds, but I could be mistaken... The only thing that I see, which you can tell in the top view pics, is it looks like it's not centered on the radiator and air cleaner pipe.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 16
- 608
-
by Joeandmack
Wed Nov 02, 2022 11:52 am
-
-
Is this bent or welded wrong? Attachment(s)
by smallfarm » Sat Jan 14, 2023 8:18 pm » in Farmall Cub - 2
- 276
-
by smallfarm
Sat Jan 14, 2023 9:26 pm
-
-
-
Paint, because I did it wrong last time.
by AndrewSpencer » Wed Apr 17, 2024 4:19 pm » in Farmall Cub - 9
- 321
-
by AndrewSpencer
Sun Apr 21, 2024 3:35 pm
-
-
-
Spring in Wrong place in Cub Hydraulics Attachment(s)
by bookman51 » Sun Sep 03, 2023 4:35 pm » in Farmall Cub - 8
- 585
-
by Glen
Tue Sep 05, 2023 4:55 pm
-
Who is online
Users browsing this forum: Majestic-12 [Bot] and 4 guests