This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
What would the original tires have been and say on them?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
What would the original tires have been and say on them?
I picked up a cub last week and I thought it had recently new tires on it, however after cleaning them up I'm thinking it may have the original tires all the way around and in great shape. Possibly kept in a barn it's whole life. Just wondering how to tell and what tolook for on them. Thanks. Btw it's a 59 model
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: What would the original tires have been and say on them?
First is to check the brand and size. There were only a limited number of brands used. In '59, original rears would have been 8-24 or 9-24, not 8.3 or 9.5.
-
- 10+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
Re: What would the original tires have been and say on them?
Rears are Firestone 8-24 and say gum dipped on the side or something like that. Will check when I get home. I believe they may indeed be original but how could they still look new and no cracks and such. Also this tractor still had the cork in most all holes on the tractor including the final drives. It's a very nice tractor just trying to determine it's previous life
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: What would the original tires have been and say on them?
Chris D wrote:Rears are Firestone 8-24 and say gum dipped on the side or something like that.
That sounds like an original tire. Probably has been kept out of the sun/weather.
-
- 10+ Years
- Posts: 5215
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: What would the original tires have been and say on them?
goodyear "diamond" type tires were from the factory also in the same sizes, I have two unmolested tractors with them that had been garaged all their life with them on it
Tim
Tim
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: What would the original tires have been and say on them?
First of all, the disclaimer:
I wasn't there when this tractor rolled off the line in Louisville. I wasn't even born yet.
The old timer I bought this wheel and tire from removed it from his 1951 cub as original equipment and was as proud of it as the day is long because of its near perfect condition and at least 75% of tread remaining.
He was mad as a hornet about his grandson tearing a hole in the other tire warranting the replacement of the pair and one wheel due to rust.
I also ran the possibility of this being a 1951 cub OEM tire by an old time Firestone tire salesman. He checked the serial number against his memory, not against any data base, and claimed from memory he was pretty sure it was original.
Now both these guys are old enough to have been around when this tractor was built but again, this was their recollection as to whether it was an original or not.
IHC could have had more than one tire vendor, I don't know if that was the case either.
If anybody has information that proves the following to be inaccurate, please let me know.
I realize the gentleman that started this thread was looking for 1959 info but this is for the model year 1951.
With that said, I will describe the tire from the top starting with the large "Firestone" lettering and moving clockwise.
The serial number was branded, not molded into the sidewall of the tire and reads as follows: EU030149
Starting at the top of the tire "Firestone" in large letters is molded into the sidewall. The serial number is branded just to the left of that.
Next and 90 degrees to the right and molded in medium size letters: "8.3-24" and below that in smaller print: "On 7" rim 8-24". Below that in larger letters "R-1" then a space then "4 ply rating"
Next line "Made in USA".
90 degrees to the right in larger letters read "Field and Road", in smaller script letters below that: "Gum Dipped" with the Firestone logo between "gum" and "dipped".
90 degrees from the above in medium size letters: " Shock Fortified" and on the next line below in smaller print: -MBDL - 1 80-31088-1
I hope this provides collectors with some sort of benchmark for 1951 factory Firestone rear ag tread tires. Again, please let me know if you have contradicting information.
When looking at your tires, check the inside side wall as the data is usually much crisper because less of the raised lettering has been scrubbed off.
I wasn't there when this tractor rolled off the line in Louisville. I wasn't even born yet.
The old timer I bought this wheel and tire from removed it from his 1951 cub as original equipment and was as proud of it as the day is long because of its near perfect condition and at least 75% of tread remaining.
He was mad as a hornet about his grandson tearing a hole in the other tire warranting the replacement of the pair and one wheel due to rust.
I also ran the possibility of this being a 1951 cub OEM tire by an old time Firestone tire salesman. He checked the serial number against his memory, not against any data base, and claimed from memory he was pretty sure it was original.
Now both these guys are old enough to have been around when this tractor was built but again, this was their recollection as to whether it was an original or not.
IHC could have had more than one tire vendor, I don't know if that was the case either.
If anybody has information that proves the following to be inaccurate, please let me know.
I realize the gentleman that started this thread was looking for 1959 info but this is for the model year 1951.
With that said, I will describe the tire from the top starting with the large "Firestone" lettering and moving clockwise.
The serial number was branded, not molded into the sidewall of the tire and reads as follows: EU030149
Starting at the top of the tire "Firestone" in large letters is molded into the sidewall. The serial number is branded just to the left of that.
Next and 90 degrees to the right and molded in medium size letters: "8.3-24" and below that in smaller print: "On 7" rim 8-24". Below that in larger letters "R-1" then a space then "4 ply rating"
Next line "Made in USA".
90 degrees to the right in larger letters read "Field and Road", in smaller script letters below that: "Gum Dipped" with the Firestone logo between "gum" and "dipped".
90 degrees from the above in medium size letters: " Shock Fortified" and on the next line below in smaller print: -MBDL - 1 80-31088-1
I hope this provides collectors with some sort of benchmark for 1951 factory Firestone rear ag tread tires. Again, please let me know if you have contradicting information.
When looking at your tires, check the inside side wall as the data is usually much crisper because less of the raised lettering has been scrubbed off.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
-
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: What would the original tires have been and say on them?
8.3-24 was not a tire measurement used in 1951. If it were original, it would be simply 8-24 as Jim posted above.
Your tire is a replacement.
**Tire Sizing History: http://www.millertire.com/faqs/
Your tire is a replacement.
**Tire Sizing History: http://www.millertire.com/faqs/
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
Re: What would the original tires have been and say on them?
My tires read the same as the above posted type but mine just say 8-24. I believe the front tires have been replaced at some point though. They are straight 3 rib tires but the outer edges are smooth and not notched.
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: What would the original tires have been and say on them?
And as I said above, there were only a limited number of brands used. But it was more than one. Sometimes you wouldn't even get the same brand on both ends of one tractor.
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: What would the original tires have been and say on them?
RaymondDurban wrote:Your tire is a replacement.
**Tire Sizing History: http://www.millertire.com/faqs/
Thank you for your information and informative link.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
-
- Similar Topics
- Replies
- Views
- Last post
-
- 11
- 391
-
by Stanton
Wed Oct 20, 2021 1:30 pm
-
- 2
- 367
-
by todd4food
Sun Feb 19, 2023 9:49 pm
-
- 29
- 1006
-
by indy61
Fri Feb 17, 2023 1:56 pm
-
- 7
- 349
-
by Denny Clayton
Sun Feb 06, 2022 10:08 am
-
- 10
- 561
-
by Cub parts man
Tue Feb 20, 2024 9:48 am
Who is online
Users browsing this forum: No registered users and 2 guests