I am wanting to order the T/C rebuild kit for a 1976 long stripe cub. The T/C unit doesn't have regular part and date casting numbers on the left like most. The only numbers on the left side are 12 75 stamped on the flat above where the lines attach. On the end behind the dash there is a number cast on what I was told is the head. Maybe someone that knows the late cubs can help me with the right rebuild kit. The serial number for this cub is 248854. Thanks for any help. Here are a few pic's
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Rebuild Kit For 76 Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Star!!
- Posts: 270
- Joined: Sat Oct 02, 2021 12:04 pm
- Zip Code: 28635
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Rebuild Kit For 76 Cub
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Rebuild Kit For 76 Cub
My '79 is about the same. It has a nearly legible mark that may be a date code. They may have put the part number some hard to find place, like inside. I think you can assume it is part 360719R1 until you run into some evidence otherwise.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Rebuild Kit For 76 Cub
like the link I posted
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Cub Star!!
- Posts: 270
- Joined: Sat Oct 02, 2021 12:04 pm
- Zip Code: 28635
Re: Rebuild Kit For 76 Cub
I tried to reach someone at TMTractor parts with no success today. I am sure they know what rebuild kit I need for this unit even I don't have a parts number. I did talk to someone at De farmall cubs and was told that I must be over looking the number and the number on the end was the head number. So the number 360719R1 should be the right number and may be on the inside. I just didn't want to get the wrong kit and take the unit apart only to find the kit was not the right one.
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Rebuild Kit For 76 Cub
At this point, you have 2 choices. Start tearing it apart and order the kit after you find proof of the block number. Or order the kit for 360719R1 hoping it is correct and tear into it after you have the kit. I would be very surprised if it isn't the right kit. Boss Hog gave you the pointer to the right kit for that block.
-
- Cub Star!!
- Posts: 270
- Joined: Sat Oct 02, 2021 12:04 pm
- Zip Code: 28635
Re: Rebuild Kit For 76 Cub
I have to say I trust Boss Hogs judgement on this, and will order the kit he referred me to.
Thanks
Paul
Thanks
Paul
-
- Cub Pro
- Posts: 852
- Joined: Fri May 09, 2008 2:47 pm
- Zip Code: 74022
- Tractors Owned: 8 F Cubs, 7 Lo-Boys, 2 # LoBoys, 1 CC, 1 H, 1 other
- Circle of Safety: Y
- Location: OK, Copan
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Rebuild Kit For 76 Cub
Glad you posed that Arthur, I was going to try describing where that was located, but a picture is better
Another way to tell is to look straight in from the rear where pistons enter). I know, I am backwards. If there are 2 fairly large plugs screwed in, you have an early one which would be block number 351981R1 or 354383R1 through 354383R4.
If no hex plugs screwed in the back you have TC block 360719R1
Another way to tell is to look straight in from the rear where pistons enter). I know, I am backwards. If there are 2 fairly large plugs screwed in, you have an early one which would be block number 351981R1 or 354383R1 through 354383R4.
If no hex plugs screwed in the back you have TC block 360719R1
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Cub Star!!
- Posts: 270
- Joined: Sat Oct 02, 2021 12:04 pm
- Zip Code: 28635
Re: Rebuild Kit For 76 Cub
Well what do you know, I went out to the shop and there it was under a layer of dust and dirt just as Art's picture shows just inside top left 360719-R1. I know I would have seen it at some point. After being advised to make sure I had the right number and not seeing it right away I thought I had better ask someone who would know. Thanks Art, John, Jim, Boss, and all.
Paul
Paul
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 257
-
by Glen
Sun Sep 19, 2021 8:00 pm
-
- 4
- 422
-
by Cecil
Sun Nov 14, 2021 7:51 am
-
- 11
- 493
-
by Bob McCarty
Thu Mar 24, 2022 2:03 pm
-
- 5
- 256
-
by Dale Finch
Tue Jul 18, 2023 9:32 pm
-
- 5
- 624
-
by inairam
Thu Aug 24, 2023 6:07 am
Who is online
Users browsing this forum: No registered users and 1 guest