I have a knocking sound when in second gear. can anyone tell me what's wrong. and how to repair it.
Thanks
Dave
second gear
Moderator: Team Cub
5 posts
• Page 1 of 1
second gear
by deadon115 » Fri Nov 02, 2012 12:45 am
- deadon115
- Posts: 4
- Joined: Fri Nov 02, 2012 12:17 am
- Zip Code: 16441
Re: second gear
by Rudi » Fri Nov 02, 2012 11:14 am
Dave:
You will have to take the shifter tower off of the tranny. 1st thing is to check if the forks are loose, if so, tighten them up. You may also have a chipped gear .. then you will have to split the tranny and replace the gear. The Service Manual will have the procedure for that. Also these articles may be of help and of course for your Implement Mounting Hole problem:
You will have to take the shifter tower off of the tranny. 1st thing is to check if the forks are loose, if so, tighten them up. You may also have a chipped gear .. then you will have to split the tranny and replace the gear. The Service Manual will have the procedure for that. Also these articles may be of help and of course for your Implement Mounting Hole problem:
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship 
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
-
Rudi - Team Cub
- Posts: 26980
- Joined: Sun Feb 02, 2003 8:37 pm
- Location: NB Dieppe, Canada
- Zip Code: E1A7J3
- eBay ID: ve9rhs
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC 
- Circle of Safety: Y
Re: second gear
by cubguy47 » Fri Nov 02, 2012 2:39 pm
Do some further investigation as Rudi mentioned. I would suggest jacking up the rear of the Cub, remove the rear wheels, and try to narrow down the source of the noise and exactly what may be causing it.
I have been collecting, buying, and selling Farmall Cub tractors, implements, and parts for nearly 11 years.
-
cubguy47 - 501 Club
- Posts: 2198
- Joined: Fri Dec 03, 2004 3:17 pm
- Location: Staunton, IL
- Zip Code: 62088
- eBay ID: cubguy47
- Tractors Owned: More Cubs, implements, and parts than I care to count!
- Circle of Safety: Y
Re: second gear
by Don McCombs » Fri Nov 02, 2012 3:57 pm
Check all your wheel center and rim bolts, to make sure none are loose.
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9491
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH - Circle of Safety: Y
Re: second gear
by deadon115 » Sat Nov 03, 2012 12:37 am
Thanks rudi, don and cubguy. I will try your suggestions. thankyou again.
Dave.
Dave.
- deadon115
- Posts: 4
- Joined: Fri Nov 02, 2012 12:17 am
- Zip Code: 16441
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: AAm, Bob McCarty, Jason (IL), tractorpoor and 7 guests
|
|