This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Snow in the Berkshires, too
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
Re: Snow in the Berkshires, too
The bolt to adjust the blade cutting angle is in the center of the blade just below where the pin would drop thru for side to side angle adjustment. There are 3 adjustment holes there and yours seems to be in the hole closest to the front. There is a bracket with the rod and spring that bolts there. The rod and spring are laying down. If you move the bolt to the center hole it will stand the blade up and do a much better job. This is the bolt these guys are referring to. Check under the main frame just below the center angle adjusting pin.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 272
-
by Urbish
Fri Feb 04, 2022 7:52 am
-
- 89
- 2560
-
by Pap
Sat Feb 05, 2022 6:14 pm
-
- 22
- 597
-
by Peter Person
Fri Sep 15, 2023 9:10 am
-
- 7
- 240
-
by cdahl383
Sat Sep 23, 2023 9:16 am
-
- 26
- 1096
-
by cdahl383
Sun Jan 21, 2024 12:38 pm
Who is online
Users browsing this forum: No registered users and 3 guests