This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Right hand Lo Boy cut fender from factory
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 505
- Joined: Thu Jan 06, 2011 5:46 pm
- Zip Code: 27265
- Tractors Owned: Ford 2000
78 Cub Fast Hitch Red
78 Cub Red
76 Cub Red
75 Cub (Not Long Stripe) Yellow
70 Cub Yellow Fast Hitch
53 Cub 151 Disk Plow
69 Cub - Circle of Safety: Y
- Location: NC
Re: Right hand Lo Boy cut fender from factory
http://tractors.wikia.com/wiki/File:Int ... y_1967.jpg
I know this is not much of a pic but it looks like it might be the same fender?
I know this is not much of a pic but it looks like it might be the same fender?
Have A Nice Day!
-
- 10+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
Re: Right hand Lo Boy cut fender from factory
Owner modified or factory done I can't confirm but this one has the same cut fender.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Right hand Lo Boy cut fender from factory
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Right hand Lo Boy cut fender from factory
After seeing all these additional pictures, here's my theory. Someone(like myself) years back made up some fenders to combat the hard-to-get-on Loboy and sold them. It's even possible dealers had access to these fenders somehow, but internet wasn't here yet. I really don't think the IH factory made these because of the mix/match of metal work that was done. IH would have just continued their fancy half rolled edge all the way down. These two suspect fenders almost appear to have either round tube or solid roundstock as an edge and then metalfinished to blend. I could make these fender mods easy, several others on this site could too, like tst..
I still believe the manual pics are of a regular fender, just pencil drawn/viewed bad. A good sketch artist that could pencil draw these two suspect fenders would reveal a more true accurate picture. My feelings, it would look very different.
Mods,Is there any way to transfer/copy all these discussions/pictures over to the main forum so it's not lost a couple weeks down the road when the add runs out, If we all agree to it ??????
Just remember, all this talk is to reveal the truth so we all are comfortable with the results. We may never know the truth or maybe some new information will pop up to confirm things. Digging for the answers is good, long as we don't get our shorts all wadded up in a knot in the process
Rick
I still believe the manual pics are of a regular fender, just pencil drawn/viewed bad. A good sketch artist that could pencil draw these two suspect fenders would reveal a more true accurate picture. My feelings, it would look very different.
Mods,Is there any way to transfer/copy all these discussions/pictures over to the main forum so it's not lost a couple weeks down the road when the add runs out, If we all agree to it ??????
Just remember, all this talk is to reveal the truth so we all are comfortable with the results. We may never know the truth or maybe some new information will pop up to confirm things. Digging for the answers is good, long as we don't get our shorts all wadded up in a knot in the process
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Right hand Lo Boy cut fender from factory
I don't see how this picture has that shortfender. If you remember to remove the plate off the bottom, that would reveal a normal length/height fender.
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Right hand Lo Boy cut fender from factory
Rick blow the pic up and you can see it better
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Right hand Lo Boy cut fender from factory
On further review I will agree with you on the pic I posted egg on my face
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Right hand Lo Boy cut fender from factory
by all means move it to the main forum, I feel this is an important issue
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub
- Posts: 24272
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Right hand Lo Boy cut fender from factory
Rick Prentice wrote:If you remember to remove the plate off the bottom, that would reveal a normal length/height fender.
Not the best of pictures after blowing it up, but the curve can be seen where the bottom plate makes it look square cut.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Right hand Lo Boy cut fender from factory
Boss, I know it would be alot to ask, but if you'd take the plate off your fender and position it at the exact same pose/angle as the manual sketch, I really think that would reveal a big difference
Thanks, Rick
Thanks, Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Right hand Lo Boy cut fender from factory
I will do it as soon as I can get a chance
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 505
- Joined: Thu Jan 06, 2011 5:46 pm
- Zip Code: 27265
- Tractors Owned: Ford 2000
78 Cub Fast Hitch Red
78 Cub Red
76 Cub Red
75 Cub (Not Long Stripe) Yellow
70 Cub Yellow Fast Hitch
53 Cub 151 Disk Plow
69 Cub - Circle of Safety: Y
- Location: NC
Re: Right hand Lo Boy cut fender from factory
I Know some really good fab people and paint and body people and i have seen a lot of stuff made out of sheet metal, Custom body panels for cars and motorcycles and so on, but i have never seen them not have have to put some kind of body filler in the panels to make them them look straight, to get all the little dings and dents out. From were the paint is missing on boss's fender it dont look like it has any filler in it to me. That is one of the things that makes me think it is not handmade.
Have A Nice Day!
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Right hand Lo Boy cut fender from factory
I have found out something else, There is some yellow primer on the fender I did not think they primed the fenders and hoods
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Right hand Lo Boy cut fender from factory
Thanks for taking the time, Boss. I took the two pics and drew an imaginary line from curved points to curved points to show why I don't think the manual pic is your fender. You can see the drastic difference now.
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Right hand Lo Boy cut fender from factory
Your line is not in the right place At the rear of the fender Look in relation to when the holes are in the fender. And after all Jim said it was a funky drawing The line should be where the 3 hole are if they were in the right fender.
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0
- 118
-
by Command52
Sun Jun 27, 2021 3:03 pm
-
-
C22 Mower Help (pitman, Knife Clips, Fender Rod)
by jbevard » Mon Mar 18, 2024 9:39 pm » in Farmall Cub - 5
- 236
-
by jbevard
Tue Mar 19, 2024 8:12 pm
-
-
- 10
- 562
-
by Cub parts man
Tue Feb 20, 2024 9:48 am
-
-
Rear fender warning light mount pics Attachment(s)
by MrBee » Sun Jun 27, 2021 3:58 pm » in Farmall Cub - 2
- 286
-
by MrBee
Sun Jun 27, 2021 9:55 pm
-
-
- 0
- 110
-
by wrz
Tue Sep 26, 2023 5:50 pm
Who is online
Users browsing this forum: Majestic-12 [Bot] and 4 guests