In looking at the TC-37F parts manual, there were three different governor shafts listed (251456R93, 355303R91 and 357440R91). Each number has a corresponding serial number range and I would assume that each new number is a design change that would supersede the previous/existing number.
501 to 106701, design one, until April of 1950
106702 to 164222, design two, April 1950 until January 1953
164223 to end of production, design three, January 1953 until the end
I have one of the first number governor shaft (251456R93) and one of the last (357440R91), does anyone have an example of the second number/style (355303R91) that they could post a picture of? The changes from the first design to the last are pretty clear, I would just like to know what the "intermediate" design looked like and what changes were made. I am trying to see what the changes were from one governor shaft to the next, but I do not have an example of the second style.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
governor shaft design/chronology question.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 203
- Joined: Thu Sep 29, 2011 3:17 pm
- Zip Code: 48180
- Tractors Owned: 1952 Cub with
- 54 Blade
- 193 Moldboard Plow
- Woods 59 C-2 mower
governor shaft design/chronology question.
Where you are, right now, is of absolutly no use unless you are able to get away from it, FAST!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
C-2 mower design suggestions needed Attachment(s)
by Bob McCarty » Wed May 26, 2021 10:03 am » in Farmall Cub - 13
- 421
-
by Waif
Wed Jun 02, 2021 11:23 am
-
-
-
Now I've Done It - Governor Question Attachment(s)
by eric1963buick » Wed May 26, 2021 7:57 pm » in Farmall Cub - 18
- 606
-
by Steve Butram
Sat May 29, 2021 4:52 am
-
-
- 3
- 209
-
by inairam
Fri Oct 29, 2021 6:27 am
-
-
Right side differential shaft question Attachment(s)
by Tim in MN » Wed May 17, 2023 5:52 pm » in Farmall Cub - 4
- 218
-
by Tim in MN
Tue May 23, 2023 12:59 pm
-
-
-
Rear input shaft bearing shields-- question Attachment(s)
by Bob McCarty » Wed Jan 03, 2024 7:43 pm » in Farmall Cub - 2
- 710
-
by Bob McCarty
Thu Jan 04, 2024 6:21 pm
-
Who is online
Users browsing this forum: Bob McCarty and 4 guests