This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Looking for 3pt plows
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 4
- Joined: Wed Mar 06, 2013 4:07 pm
- Zip Code: 70444
Looking for 3pt plows
My mother inherited a 1949 Cub tractor. Now that we have it running we are in search of implements to garden. She says that it needs 3 pt plows. We have talked to local tractor companies but without any luck. I found this website when on Amazon.com and hope that someone can help us out. Thank you.
-
- Team Cub
- Posts: 24272
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Looking for 3pt plows
Ruth, three point plows will not work on a Cub. What you need for a Cub is a model 193 single point plow unless you have a fast hitch, then you would need a model 194 single point. A Cub will not handle more than one plow at a time.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 23
- Joined: Sat Feb 02, 2013 4:09 pm
- Zip Code: 13037
Re: Looking for 3pt plows
Does your cub have a 3 point hitch? If so, it would be unusual. Post a picture of the rear end of your tractor--the hitch mechanism--and members here will tell you the type of plow you need and where you might find one.
-
- Team Cub
- Posts: 11862
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Looking for 3pt plows
I looked up your zip code and see that you are northern Louisiana. There are several great Cubbers not far from you that can help you find a plow once it is determined what kind you need. Also, welcome to the Forum.
Does the back of your tractor look like this:
or this:
The first picture is the usual drawbar, the second is the fast hitch that takes implements designed for it. There are aftermarket 3-point hitches made, but they are expensive and not terribly practical for use on Cubs.
Bob
Edit: photos courtesy of TM Tractor
Does the back of your tractor look like this:
or this:
The first picture is the usual drawbar, the second is the fast hitch that takes implements designed for it. There are aftermarket 3-point hitches made, but they are expensive and not terribly practical for use on Cubs.
Bob
Edit: photos courtesy of TM Tractor
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Looking for 3pt plows
G\day to you and congrats to your Mom on her inheriting her '49 Cub
Suggest that both you and Ruth spend some time reading the links below. Pay special attention to the McCormick Farmall Cub Operator's Manual 5-1-49 and the implements for the Cub in the Cub Implement Manuals section. As Bill mentioned you need a Cub-193 Moldboard Plow 11-20-51. 3 point equipment will not fit a Cub. Cub specific implements are essentially required but are not hard to find.
Enjoy the Cub, post pics when you can cause we like em a lot
Suggest that both you and Ruth spend some time reading the links below. Pay special attention to the McCormick Farmall Cub Operator's Manual 5-1-49 and the implements for the Cub in the Cub Implement Manuals section. As Bill mentioned you need a Cub-193 Moldboard Plow 11-20-51. 3 point equipment will not fit a Cub. Cub specific implements are essentially required but are not hard to find.
Enjoy the Cub, post pics when you can cause we like em a lot
to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 4
- Joined: Wed Mar 06, 2013 4:07 pm
- Zip Code: 70444
Re: Looking for 3pt plows
Thank you for your questions. I will take a picture of the rear end of the tractor and post so that all of you can view. My mother is 81 and her memory is not so good. She said that she needs a 3 pt. plow. Bob, I live in southeast Louisiana near the toe of the "boot". Thank you to all of you for your input.
-
- 10+ Years
- Posts: 4
- Joined: Wed Mar 06, 2013 4:07 pm
- Zip Code: 70444
Re: Looking for 3pt plows
Here are the pictures of the cub tractor and my mom. Her name is Shirley and she is 81.
-
- 10+ Years
- Posts: 3415
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Looking for 3pt plows
That tractor doesn't have a 3 point system. You'll need a 193 moldboard plow and a drawbar as Rudi mentioned or a 152 belly plow.
Thomas
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Looking for 3pt plows
Looks like they might be needing shanks and shovels/plows for the cultivator frames?
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Looking for 3pt plows
to clarify just a little more, your cub has the frame for a cultivator for cleaning weeds between rows of plants. Some people do call them plows, but an actual plow is for turning the soil in preparation to disking and planting. If you will follow this link it shows a cub with the attachments that were available for the early cubs. Of course there are a lot more attachments to fit now than there was then.
http://home.centurytel.net/ejpuckett/19 ... %20upload/
http://home.centurytel.net/ejpuckett/19 ... %20upload/
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 4
- Joined: Wed Mar 06, 2013 4:07 pm
- Zip Code: 70444
Re: Looking for 3pt plows
Thank you so much for your help! Now that I know what we need, where do I purchase the parts that I need?
-
- 10+ Years
- Posts: 3415
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Looking for 3pt plows
What parts are you looking for? That hasn't been clarified yet. You can place an ad in the wanted section of this forum
Thomas
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Looking for 3pt plows
I think they're looking for standards, clamps and sweeps/shovels.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10
- 393
-
by Don McCombs
Sat May 27, 2023 5:03 pm
Who is online
Users browsing this forum: Bob McCarty, Majestic-12 [Bot] and 6 guests