This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Steering Arm Help
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 3417
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Steering Arm Help
How do I go about replicating the tapered hole that the steering arm lock bolt goes into? Thanks
Thomas
-
- 10+ Years
- Posts: 1655
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
Re: Steering Arm Help
thomas , i do not know how a home shop would do that . maybe one of our cubbers with a machinist backround could think of a "home brewed" way to do it . coppersmythe.............................................
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Steering Arm Help
I believe George Willer had made a tapered reamer for that, but all of that requires a pretty good machine shop both to make the reamer with the original taper, and then making the hole at the correct angle. Unless ou intend to do it on a regular basis it is cheaper to buy another spindle. Many of the people on the site will have them. If the bolt is broken off in yours, just insert a punch in the hole on the back side and tap it out.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 3417
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Steering Arm Help
PO replaced the tapered bolt with a large set screw. I needed to replace the arm. Set screw broke off. Looks like he may have drilled and tapped the spindle. So it's shot unless I do what he did and I'm not doing that. So off to the wanted section I go
Thomas
-
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Steering Arm Help
I have a pair of spindles if you are interested. I can look them over this weekend to confirm their condition. There are photos somewhere but I am not at my computer. I can post them tonight...just let me know. Thanks!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
47 Cub steering leak and hard steering Attachment(s)
by AHS » Sun Jun 05, 2022 6:27 am » in Farmall Cub - 10
- 511
-
by Glen
Tue Jun 14, 2022 7:14 pm
-
-
- 8
- 323
-
by Eugene
Tue Mar 12, 2024 9:27 pm
-
- 3
- 200
-
by Tractor Rod
Wed Jan 12, 2022 2:54 pm
-
- 11
- 281
-
by Greenthumbfarms
Sun Feb 13, 2022 6:32 pm
-
- 26
- 535
-
by Clemsonfor
Thu Jun 09, 2022 9:22 pm
Who is online
Users browsing this forum: No registered users and 3 guests